NORWAY · WELLBORES · NPDID 460

30/3-4

Exploration · Appraisal · Suspended · Oil/gas · Den norske stats oljeselskap a.s · Veslefrikk · PL 052

7 documents: reports, logs, and plots →

Core 2

Core 2 of 30/3-4 was cut from 2,835 to 2,839.3 m, 4.3 m in the Ness Fm. The Directorate lists core samples from it as available.

4.3
m cored · 2,835 to 2,839.3
1
photograph
6
log runs across it

SODIR FACTPAGES · PLACED BY DEPTH IN THIS WELLBORE

Down the core

TOP OF THE CORE AT THE TOP · TAP A MARK FOR WHAT IT IS

DEPTHFORMATIONCOREPHOTOSTHINSEC.SLIDESTESTS2,8352,839.3 m2,8362,838Ness Fm, 2,835 to 2,839.3 mNess FmCore 2, 2,835 to 2,839.3 mCore 24.3 m2,835 to 2,839 m: 1 photo. Open.10.8 m not cored

Photographs of this core

1 PHOTO · HOSTED BY THE NORWEGIAN OFFSHORE DIRECTORATE

What it was cut through

UnitFrom, mTo, mCore in it, m
Ness Fm2,8352,839.34.3

Every formation top in 30/3-4 →

Logs run across it

6 RUNS COVERING PART OF THE INTERVAL

  • VELOCITYvelocity (check-shot) survey600 to 3,284 m
  • CDL CNL GRcompensated densilog · compensated neutron log · gamma ray1,582 to 3,286 m
  • DIFL BHC ACL GR CALdual induction focused log · borehole-compensated sonic · acoustic log · gamma ray · caliper1,583 to 3,286 m
  • DLL MLL GRdual laterolog · microlaterolog · gamma ray2,790 to 3,286 m
  • SPECTRALOG2,790 to 3,279 m
  • FMTformation multi-tester2,827 to 3,270 m

Logs, casing, and the files you can open →

Seeing the core itself

The core is held by the Norwegian Offshore Directorate in its Geobank, which has rooms for viewing and sampling by booking.

The Directorate's Geobank: viewing and sampling →

About this data

Norwegian Offshore Directorate (Sodir) FactPages, mirrored nightly and used under the Norwegian Licence for Open Government Data (NLOD). The Directorate files a core as an interval and nothing against it. Everything else on this page is on file for the wellbore and is shown here because its depth falls inside the core's interval: photographs by the interval in their title, thin sections and slides by their depth, tests and logs by overlap, units by this wellbore's own tops. Core depths are driller's depths, so a mark at the very edge can belong to the neighboring core. Reports are filed for the well, not for one core.

Developers: this page as JSON is GET /v1/data/norway/wells/460/cores/2, documented in the API reference.