NORWAY · WELLBORES · NPDID 463

25/1-7

Exploration · Appraisal · Suspended · Oil/gas · Elf Petroleum Norge AS · Frigg · PL 024

5 documents: reports, logs, and plots →

Core 19

Core 19 of 25/1-7 was cut from 2,103 to 2,116 m, 13 m in the Frigg Fm. The Directorate lists core samples from it as available.

13
m cored · 2,103 to 2,116
4
photographs
11
log runs across it

SODIR FACTPAGES · PLACED BY DEPTH IN THIS WELLBORE

Down the core

TOP OF THE CORE AT THE TOP · TAP A MARK FOR WHAT IT IS

DEPTHFORMATIONCOREPHOTOSTHINSEC.SLIDESTESTS2,1032,116 m2,1042,1062,1082,1102,1122,114Frigg Fm, 2,103 to 2,116 mFrigg FmCore 19, 2,103 to 2,116 mCore 1913 m2,103 to 2,107 m: 1 photo. Open.12,107 to 2,111 m: 1 photo. Open.12,111 to 2,112 m: 1 photo. Open.12,112 to 2,116 m: 1 photo. Open.111 m not cored

Photographs of this core

4 PHOTOS · HOSTED BY THE NORWEGIAN OFFSHORE DIRECTORATE

What it was cut through

UnitFrom, mTo, mCore in it, m
Frigg Fm2,1032,11613

Every formation top in 25/1-7 →

Logs run across it

11 RUNS COVERING PART OF THE INTERVAL

  • ISF LSS GRinduction spherically focused log · long-spaced sonic · gamma ray188 to 2,720 m
  • CBL VDLcement bond log · variable density log435 to 2,127 m
  • CETcement evaluation tool1,330 to 2,127 m
  • HRT1,330 to 2,127 m
  • HRT1,350 to 2,115 m
  • CETcement evaluation tool1,750 to 2,127 m
  • LDL CNL NGTlitho-density log · compensated neutron log · natural gamma ray spectrometry1,850 to 2,720 m
  • HDThigh-resolution dipmeter1,856 to 2,720 m
  • SHDTstratigraphic high-resolution dipmeter1,856 to 2,720 m
  • TDT1,900 to 2,127 m
  • RFTrepeat formation tester1,919 to 2,685 m

Logs, casing, and the files you can open →

Seeing the core itself

The core is held by the Norwegian Offshore Directorate in its Geobank, which has rooms for viewing and sampling by booking.

The Directorate's Geobank: viewing and sampling →

About this data

Norwegian Offshore Directorate (Sodir) FactPages, mirrored nightly and used under the Norwegian Licence for Open Government Data (NLOD). The Directorate files a core as an interval and nothing against it. Everything else on this page is on file for the wellbore and is shown here because its depth falls inside the core's interval: photographs by the interval in their title, thin sections and slides by their depth, tests and logs by overlap, units by this wellbore's own tops. Core depths are driller's depths, so a mark at the very edge can belong to the neighboring core. Reports are filed for the well, not for one core.

Developers: this page as JSON is GET /v1/data/norway/wells/463/cores/19, documented in the API reference.