NORWAY · WELLBORES · NPDID 4711

16/1-6 S

Exploration · Wildcat · P&A · Oil/gas · Statoil ASA (old) · PL 167

6 documents: reports, logs, and plots →

Core 1

Core 1 of 16/1-6 S was cut from 1,872 to 1,898.9 m, 26.9 m in the Heimdal Fm and Lista Fm. The Directorate lists core samples from it as available.

26.9
m cored · 1,872 to 1,898.9
7
photographs
1
formation boundary crossed
3
log runs across it

SODIR FACTPAGES · PLACED BY DEPTH IN THIS WELLBORE

Down the core

TOP OF THE CORE AT THE TOP · TAP A MARK FOR WHAT IT IS

DEPTHFORMATIONCOREPHOTOSTHINSEC.SLIDESTESTS1,8721,898.9 m1,8751,8801,8851,8901,895Heimdal Fm, 1,872 to 1,875.6 mHeimdal FmLista Fm, 1,875.6 to 1,898.9 mLista FmCore 1, 1,872 to 1,898.9 mCore 126.9 m1,876 to 1,972 m: 7 photos. Open.7

Photographs of this core

7 PHOTOS · HOSTED BY THE NORWEGIAN OFFSHORE DIRECTORATE

What it was cut through

UnitFrom, mTo, mCore in it, m
Heimdal Fm1,8721,875.63.6
Lista Fm1,875.61,898.923.3

Every formation top in 16/1-6 S →

Logs run across it

3 RUNS COVERING PART OF THE INTERVAL

  • MWD - AUTOTRACK MPRmeasurement while drilling · multiple propagation resistivity1,169 to 1,997 m
  • PEX AIT DSIPlatform Express (resistivity, density, neutron) · array induction tool · dipole shear sonic imager1,197 to 1,992 m
  • MDT GRmodular formation dynamics tester · gamma ray1,499 to 1,881 m

Logs, casing, and the files you can open →

Seeing the core itself

The core is held by the Norwegian Offshore Directorate in its Geobank, which has rooms for viewing and sampling by booking.

The Directorate's Geobank: viewing and sampling →

About this data

Norwegian Offshore Directorate (Sodir) FactPages, mirrored nightly and used under the Norwegian Licence for Open Government Data (NLOD). The Directorate files a core as an interval and nothing against it. Everything else on this page is on file for the wellbore and is shown here because its depth falls inside the core's interval: photographs by the interval in their title, thin sections and slides by their depth, tests and logs by overlap, units by this wellbore's own tops. Core depths are driller's depths, so a mark at the very edge can belong to the neighboring core. Reports are filed for the well, not for one core.

Developers: this page as JSON is GET /v1/data/norway/wells/4711/cores/1, documented in the API reference.