NORWAY · WELLBORES · NPDID 473
7120/2-1
Exploration · Wildcat · P&A · Oil shows · Norsk Hydro Produksjon AS · PL 109
Core 9
Core 9 of 7120/2-1 was cut from 2,104 to 2,104.5 m, 0.5 m in the Falk Fm. The Directorate lists core samples from it as available.
- 0.5
- m cored · 2,104 to 2,104.5
- 1
- test or fluid sample across it
- 11
- log runs across it
SODIR FACTPAGES · PLACED BY DEPTH IN THIS WELLBORE
Down the core
TOP OF THE CORE AT THE TOP · TAP A MARK FOR WHAT IT IS
What it was cut through
| Unit | From, m | To, m | Core in it, m |
|---|---|---|---|
| Falk Fm | 2,104 | 2,104.5 | 0.5 |
Tests and fluid samples across it
- DST 32,048.3 to 2,108.3 mOil 0 Sm³/d · gas 0 Sm³/d
Logs run across it
11 RUNS COVERING PART OF THE INTERVAL
- DLWD474 to 2,425 m
- LDT CNL GR CALlitho-density tool · compensated neutron log · gamma ray · caliper474 to 3,492 m
- ZOVSPzero-offset vertical seismic profile589 to 2,488 m
- SHDTstratigraphic high-resolution dipmeter747 to 3,502 m
- ISF LSS GR SPinduction spherically focused log · long-spaced sonic · gamma ray · spontaneous potential909 to 3,500 m
- CETcement evaluation tool1,105 to 2,497 m
- DLL MSFL CAL GRdual laterolog · micro-spherically focused log · caliper · gamma ray1,846 to 2,251 m
- NGTnatural gamma ray spectrometry1,846 to 3,492 m
- CST GRsidewall core sample taker · gamma ray1,859 to 3,484 m
- MEST1,942 to 2,490 m
- RFT GRrepeat formation tester · gamma ray2,066 to 2,468 m
Seeing the core itself
The core is held by the Norwegian Offshore Directorate in its Geobank, which has rooms for viewing and sampling by booking.
About this data
Norwegian Offshore Directorate (Sodir) FactPages, mirrored nightly and used under the Norwegian Licence for Open Government Data (NLOD). The Directorate files a core as an interval and nothing against it. Everything else on this page is on file for the wellbore and is shown here because its depth falls inside the core's interval: photographs by the interval in their title, thin sections and slides by their depth, tests and logs by overlap, units by this wellbore's own tops. Core depths are driller's depths, so a mark at the very edge can belong to the neighboring core. Reports are filed for the well, not for one core.
Developers: this page as JSON is GET /v1/data/norway/wells/473/cores/9, documented in the API reference.