NORWAY · WELLBORES · NPDID 4767

16/1-6 A

Exploration · Appraisal · P&A · Dry · Statoil ASA (old) · PL 167

4 documents: reports, logs, and plots →

What was run in 16/1-6 A and how the hole was built: the logs with their intervals, the casing strings with leak-off tests, and the mud at depth.

Logs you can open: composite and completion logs on file

The table below says which logs were run and over what interval. The curves themselves are held in Diskos, Norway's national data repository; its public portal lists what has been released for a wellbore and can be ordered for an administrative fee. Diskos public portal →

Logs

LogTop, mBase, mComposite log for the well
VSP GRVSP vertical seismic profile · GR gamma ray00On file: open →
MWD - AUTOTRACK MPRMWD measurement while drilling · MPR multiple propagation resistivity1,1492,194On file: open →
PEX AIT DSIPEX Platform Express (resistivity, density, neutron) · AIT array induction tool · DSI dipole shear sonic imager1,1901,730On file: open →
MDT GRMDT modular formation dynamics tester · GR gamma ray1,7501,750On file: open →

Casing and leak-off tests

CasingDiameter, inDepth, mHole, inHole depth, mLOT/FIT, g/cm³Test
Conductor30203362030LOT
Surf.cond.20546265461.82LOT
Interm.13 3/81,19717 1/21,1971.6LOT
Open hole—2,1948 1/22,1940LOT

Drilling mud

3 READINGS · BY DEPTH

Depth, mWeight, g/cm³Viscosity, mPa·sYield point, PaType
1,4801.45200Novatec 55
1,6981.45170Novatec 55
1,8671.45200Novatec 55

The words under each tool string are Petrora's reading of the standard codes in it; a code we do not recognize is left as filed. The composite log is one file for the whole well. The Directorate does not say which runs or depths it draws on, so the link is the same on every row.

About this data

Norwegian Offshore Directorate (Sodir) FactPages, mirrored nightly and used under the Norwegian Licence for Open Government Data (NLOD). Log names are the Directorate's tool strings as filed; the plain-word readings beside them are Petrora's, from common industry abbreviations. Depths are metres along the wellbore from the kelly bushing; diameters are inches, as filed.

Developers: this page as JSON is GET /v1/data/norway/wells/4767, documented in the API reference.