NORWAY · WELLBORES · NPDID 491

35/3-3

Exploration · Wildcat · Junked · Not applicable · Saga Petroleum ASA · PL 041

4 documents: reports, logs, and plots →

35/3-3 is a wildcat exploration wellbore in the North Sea, drilled by Saga Petroleum ASA, entered Oct 30, 1980, to 900 m in the Hordaland Gp.

On the map →

900
m total depth · 900 m vertical
259
m water depth
Oct 30, 1980
entered · completed Nov 28, 1980
Hordaland Gp
at total depth · Oligocene
—
m of core
27
°C bottom-hole temperature

SODIR FACTPAGES · RECORD UPDATED FEB 20, 2026 · RELEASED NOV 28, 1982

On file for this wellbore

What the Directorate holds from this wellbore. Each opens the section that lists it.

Drilling

Drilling facility
BYFORD DOLPHIN · Semisub steel
Drilling days
30
Kelly bushing elevation
25 m
Maximum inclination
0°
Drilling permit
265-L
Licensing round
3
Plugged and abandoned
—
Core samples available
Yes
Cuttings samples available
Yes
Position · ED50
61.86517° N, 3.87383° E

Well history

WRITTEN BY THE NORWEGIAN OFFSHORE DIRECTORATE

General

Wildcat well 35/3-3 was drilled in the Norwegian sector of the North Sea approximately 50 km west of Måløy, Norway. The primary target was to test the possible extension of Lower Cretaceous sandstones to the east of those encountered in wells 35/3-1 and 35/3-2. A stratigraphic trap was thought to exist in these sandstones. A secondary target was possible sandstones of Early Jurassic age with a possible pinch-out trap.

Operations and results

Well 35/3-3 was spudded with the semi-submersible installation Byford Dolphin on 30 October 1980. It was drilled and logged to 900 m, then junked because of technical problems running the 20" casing. The rig was moved about 20 meters, and the well was respudded on 30 November 30 1980 as 35/3-4.

Testing

No drill stem test was performed

Around this wellbore

This wellbore on Sodir FactPages →

About this data

Norwegian Offshore Directorate (Sodir) FactPages, mirrored nightly and used under the Norwegian Licence for Open Government Data (NLOD). Depths are metres along the wellbore from the kelly bushing unless a row gives its own unit; older cores are filed in feet. A zero the Directorate files for an unmeasured pressure, density, or temperature is shown as a dash.

Developers: this page as JSON is GET /v1/data/norway/wells/491, documented in the API reference.