NORWAY · WELLBORES · NPDID 4930

24/9-7 C

Exploration · Appraisal · P&A · Oil · Marathon Petroleum Norge AS · Volund · PL 150

5 documents: reports, logs, and plots →

What was run in 24/9-7 C and how the hole was built: the logs with their intervals, the casing strings with leak-off tests, and the mud at depth.

Logs you can open: composite and completion logs on file

The table below says which logs were run and over what interval. The curves themselves are held in Diskos, Norway's national data repository; its public portal lists what has been released for a wellbore and can be ordered for an administrative fee. Diskos public portal →

Logs

LogTop, mBase, mComposite log for the well
LWD - ARC6 GR ADN ISONICLWD logging while drilling · ARC6 array resistivity compensated · GR gamma ray · ADN azimuthal density neutron9802,357On file: open →
RCI GRRCI reservoir characterization instrument · GR gamma ray2,2622,305On file: open →

Casing and leak-off tests

CasingDiameter, inDepth, mHole, inHole depth, mLOT/FIT, g/cm³Test
Open hole—2,3638 1/22,3630LOT

Drilling mud

3 READINGS · BY DEPTH

Depth, mWeight, g/cm³Viscosity, mPa·sYield point, PaType
1,0091.32280Versavert obm
1,7571.34300Versavert obm
2,3631.34280Versavert obm

The words under each tool string are Petrora's reading of the standard codes in it; a code we do not recognize is left as filed. The composite log is one file for the whole well. The Directorate does not say which runs or depths it draws on, so the link is the same on every row.

About this data

Norwegian Offshore Directorate (Sodir) FactPages, mirrored nightly and used under the Norwegian Licence for Open Government Data (NLOD). Log names are the Directorate's tool strings as filed; the plain-word readings beside them are Petrora's, from common industry abbreviations. Depths are metres along the wellbore from the kelly bushing; diameters are inches, as filed.

Developers: this page as JSON is GET /v1/data/norway/wells/4930, documented in the API reference.