NORWAY · WELLBORES · NPDID 508
30/3-2 R
Exploration · Wildcat · P&A · Oil/gas · Den norske stats oljeselskap a.s · Veslefrikk · PL 052
Core 11
Core 11 of 30/3-2 R was cut from 3,102 to 3,121.4 m, 19.4 m in the Cook Fm and Burton Fm. The Directorate lists core samples from it as available.
- 19.4
- m cored · 3,102 to 3,121.4
- 8
- photographs
- 1
- thin section in the interval
- 1
- formation boundary crossed
- 7
- log runs across it
SODIR FACTPAGES · PLACED BY DEPTH IN THIS WELLBORE
Down the core
TOP OF THE CORE AT THE TOP · TAP A MARK FOR WHAT IT IS
Photographs of this core
8 PHOTOS · HOSTED BY THE NORWEGIAN OFFSHORE DIRECTORATE
What it was cut through
Thin sections in this interval
1 ON FILE
| Section | Depth | In |
|---|---|---|
| 1319 | 3,121 m | Burton Fm |
Palynology slides made from core
0 IN THE INTERVAL
1 more slide was made from cuttings or sidewall cores at depths inside this interval, not from the core itself. Every slide from the well →
Logs run across it
7 RUNS COVERING PART OF THE INTERVAL
- ISF SONIC GR SPinduction spherically focused log · sonic · gamma ray · spontaneous potential259 to 3,567 m
- FDC CNL GR CALcompensated formation density · compensated neutron log · gamma ray · caliper940 to 3,567 m
- CBL CCL GRcement bond log · casing collar locator · gamma ray1,675 to 3,569 m
- DLL MSFL GRdual laterolog · micro-spherically focused log · gamma ray2,332 to 3,562 m
- HDThigh-resolution dipmeter2,332 to 3,567 m
- GEODIP2,800 to 3,125 m
- LDT GR CALlitho-density tool · gamma ray · caliper3,051 to 3,567 m
Seeing the core itself
The core is held by the Norwegian Offshore Directorate in its Geobank, which has rooms for viewing and sampling by booking.
About this data
Norwegian Offshore Directorate (Sodir) FactPages, mirrored nightly and used under the Norwegian Licence for Open Government Data (NLOD). The Directorate files a core as an interval and nothing against it. Everything else on this page is on file for the wellbore and is shown here because its depth falls inside the core's interval: photographs by the interval in their title, thin sections and slides by their depth, tests and logs by overlap, units by this wellbore's own tops. Core depths are driller's depths, so a mark at the very edge can belong to the neighboring core. Reports are filed for the well, not for one core.
Developers: this page as JSON is GET /v1/data/norway/wells/508/cores/11, documented in the API reference.