NORWAY · WELLBORES · NPDID 5086
6302/6-1
Exploration · Wildcat · P&A · Gas · Statoil ASA (old) · PL 251
What was run in 6302/6-1 and how the hole was built: the logs with their intervals, the casing strings with leak-off tests, and the mud at depth.
Logs you can open: composite and completion logs on file
- Composite logpdf · 556 KB
The table below says which logs were run and over what interval. The curves themselves are held in Diskos, Norway's national data repository; its public portal lists what has been released for a wellbore and can be ordered for an administrative fee. Diskos public portal →
Logs
| Log | Top, m | Base, m | Composite log for the well |
|---|---|---|---|
| CSI | 1,305 | 3,015 | On file: open → |
| VSPVSP vertical seismic profile | 1,315 | 4,237 | On file: open → |
| MWD - MPR DCPMWD measurement while drilling · MPR multiple propagation resistivity | 1,366 | 4,230 | On file: open → |
| CSI | 2,000 | 4,225 | On file: open → |
| PEX DSI HRLAPEX Platform Express (resistivity, density, neutron) · DSI dipole shear sonic imager · HRLA high-resolution laterolog array | 2,319 | 3,018 | On file: open → |
| PEX DSI HRLAPEX Platform Express (resistivity, density, neutron) · DSI dipole shear sonic imager · HRLA high-resolution laterolog array | 3,035 | 3,844 | On file: open → |
| MSCTMSCT mechanical sidewall coring tool | 3,124 | 3,826 | On file: open → |
| PEX HRLA CMR HNGSPEX Platform Express (resistivity, density, neutron) · HRLA high-resolution laterolog array · CMR combinable magnetic resonance · HNGS spectral gamma ray (hostile environment) | 3,200 | 4,230 | On file: open → |
| FMI MSIPFMI formation micro-imager · MSIP modular sonic imaging platform (Sonic Scanner) | 3,600 | 4,230 | On file: open → |
| MSCTMSCT mechanical sidewall coring tool | 3,901 | 4,218 | On file: open → |
| MDTMDT modular formation dynamics tester | 3,902 | 4,139 | On file: open → |
| MDTMDT modular formation dynamics tester | 3,920 | 3,968 | On file: open → |
| MDTMDT modular formation dynamics tester | 3,937 | 3,937 | On file: open → |
| MSCTMSCT mechanical sidewall coring tool | 3,939 | 4,218 | On file: open → |
Casing and leak-off tests
| Casing | Diameter, in | Depth, m | Hole, in | Hole depth, m | LOT/FIT, g/cm³ | Test |
|---|---|---|---|---|---|---|
| Conductor | 30 | 1,363 | 36 | 1,363 | 0 | LOT |
| Surf.cond. | 20 | 1,960 | 26 | 1,960 | 1.29 | LOT |
| Interm. | 16 | 2,380 | 17 1/2 | 2,380 | 1.6 | LOT |
| Interm. | 13 3/8 | 3,035 | 17 1/2 | 3,035 | 1.49 | LOT |
| Interm. | 9 5/8 | 3,840 | 12 1/4 | 3,840 | 1.72 | LOT |
| Open hole | — | 4,230 | 8 1/2 | 4,230 | 0 | LOT |
Drilling mud
13 READINGS · BY DEPTH
| Depth, m | Weight, g/cm³ | Viscosity, mPa·s | Yield point, Pa | Type |
|---|---|---|---|---|
| 1,332 | 1.05 | 0 | 0 | Bentonite/sw 1 |
| 1,366.5 | 1.05 | 0 | 0 | Sw / bentonite 1 |
| 1,849 | 1.05 | 0 | 0 | Sw / polymer 2 |
| 1,968 | 1.18 | 16 | 0 | Glydril dw 36 |
| 2,102 | 1.23 | 16 | 0 | Glydril dw 36 |
| 2,390 | 1.24 | 14 | 0 | Glydril dw 37 |
| 3,046 | 1.37 | 19 | 0 | Glydril dw 37 |
| 3,060 | 1.39 | 19 | 0 | Glydril dw 37 |
| 3,845 | 1.39 | 22 | 0 | Glydril dw 37 |
| 3,902 | 1.37 | 20 | 0 | Glydril dw 37 |
| 3,918 | 1.56 | 30 | 0 | Glydril dw 36 |
| 3,941 | 1.56 | 30 | 0 | Glydril dw 36 |
| 3,996 | 1.56 | 27 | 0 | Glydril dw 36 |
The words under each tool string are Petrora's reading of the standard codes in it; a code we do not recognize is left as filed. The composite log is one file for the whole well. The Directorate does not say which runs or depths it draws on, so the link is the same on every row.
About this data
Norwegian Offshore Directorate (Sodir) FactPages, mirrored nightly and used under the Norwegian Licence for Open Government Data (NLOD). Log names are the Directorate's tool strings as filed; the plain-word readings beside them are Petrora's, from common industry abbreviations. Depths are metres along the wellbore from the kelly bushing; diameters are inches, as filed.
Developers: this page as JSON is GET /v1/data/norway/wells/5086, documented in the API reference.