NORWAY · WELLBORES · NPDID 512

25/10-1 R

Exploration · Appraisal · P&A · Shows · Esso Exploration and Production Norway A/S · Balder · PL 028

Core 13

Core 13 of 25/10-1 R was cut from 5,859 to 5,919 ft, 60 ft in the Heimdal Fm and Lista Fm. The Directorate lists core samples from it as available.

60
ft cored · 5,859 to 5,919
2
formation boundaries crossed
5
log runs across it

SODIR FACTPAGES · PLACED BY DEPTH IN THIS WELLBORE · CORE FILED IN FEET, COMPARED AS 1,785.8 TO 1,804.1 M

Down the core

TOP OF THE CORE AT THE TOP · TAP A MARK FOR WHAT IT IS

DEPTHFORMATIONCOREPHOTOSTHINSEC.SLIDESTESTS5,8595,919 ft5,8705,8805,8905,9005,910Heimdal Fm, 1,785.8 to 1,800 mHeimdal FmLista Fm, 1,800 to 1,804 mLista FmHeimdal Fm, 1,804 to 1,804.1 mCore 13, 5,859 to 5,919 ftCore 1360 ft

The Directorate has no photographs, thin sections, core-derived slides, or tests on file inside this core's interval. The well's core reports, where there are any, are below.

What it was cut through

UnitFrom, mTo, mCore in it, m
Heimdal Fm1,785.81,80014.2
Lista Fm1,8001,8044
Heimdal Fm1,8041,804.10.1

Every formation top in 25/10-1 R →

Logs run across it

5 RUNS COVERING PART OF THE INTERVAL

  • SON BHC GRsonic · borehole-compensated sonic · gamma ray1,368 to 2,090 m
  • FDCcompensated formation density1,369 to 2,090 m
  • MLL CALmicrolaterolog · caliper1,369 to 2,090 m
  • DIPdipmeter1,645 to 2,090 m
  • IELinduction electrical log1,645 to 2,090 m

Logs, casing, and the files you can open →

Seeing the core itself

The core is held by the Norwegian Offshore Directorate in its Geobank, which has rooms for viewing and sampling by booking.

The Directorate's Geobank: viewing and sampling →

About this data

Norwegian Offshore Directorate (Sodir) FactPages, mirrored nightly and used under the Norwegian Licence for Open Government Data (NLOD). The Directorate files a core as an interval and nothing against it. Everything else on this page is on file for the wellbore and is shown here because its depth falls inside the core's interval: photographs by the interval in their title, thin sections and slides by their depth, tests and logs by overlap, units by this wellbore's own tops. Core depths are driller's depths, so a mark at the very edge can belong to the neighboring core. Reports are filed for the well, not for one core.

Developers: this page as JSON is GET /v1/data/norway/wells/512/cores/13, documented in the API reference.