NORWAY · WELLBORES · NPDID 512
25/10-1 R
Exploration · Appraisal · P&A · Shows · Esso Exploration and Production Norway A/S · Balder · PL 028
Core 4
Core 4 of 25/10-1 R was cut from 5,605 to 5,645 ft, 40 ft in the Balder Fm and Sele Fm. The Directorate lists core samples from it as available.
- 40
- ft cored · 5,605 to 5,645
- 1
- formation boundary crossed
- 5
- log runs across it
SODIR FACTPAGES · PLACED BY DEPTH IN THIS WELLBORE · CORE FILED IN FEET, COMPARED AS 1,708.4 TO 1,720.6 M
Down the core
TOP OF THE CORE AT THE TOP · TAP A MARK FOR WHAT IT IS
The Directorate has no photographs, thin sections, core-derived slides, or tests on file inside this core's interval. The well's core reports, where there are any, are below.
What it was cut through
Logs run across it
5 RUNS COVERING PART OF THE INTERVAL
- SON BHC GRsonic · borehole-compensated sonic · gamma ray1,368 to 2,090 m
- FDCcompensated formation density1,369 to 2,090 m
- MLL CALmicrolaterolog · caliper1,369 to 2,090 m
- DIPdipmeter1,645 to 2,090 m
- IELinduction electrical log1,645 to 2,090 m
Seeing the core itself
The core is held by the Norwegian Offshore Directorate in its Geobank, which has rooms for viewing and sampling by booking.
About this data
Norwegian Offshore Directorate (Sodir) FactPages, mirrored nightly and used under the Norwegian Licence for Open Government Data (NLOD). The Directorate files a core as an interval and nothing against it. Everything else on this page is on file for the wellbore and is shown here because its depth falls inside the core's interval: photographs by the interval in their title, thin sections and slides by their depth, tests and logs by overlap, units by this wellbore's own tops. Core depths are driller's depths, so a mark at the very edge can belong to the neighboring core. Reports are filed for the well, not for one core.
Developers: this page as JSON is GET /v1/data/norway/wells/512/cores/4, documented in the API reference.