NORWAY · WELLBORES · NPDID 5140

34/10-49 S

Exploration · Wildcat · P&A · Oil · Statoil ASA (old) · Gullfaks Sør · PL 050

4 documents: reports, logs, and plots →

What was run in 34/10-49 S and how the hole was built: the logs with their intervals, the casing strings with leak-off tests, and the mud at depth.

Logs you can open: composite and completion logs on file

The table below says which logs were run and over what interval. The curves themselves are held in Diskos, Norway's national data repository; its public portal lists what has been released for a wellbore and can be ordered for an administrative fee. Diskos public portal →

Logs

LogTop, mBase, m
PEX MDT GRPEX Platform Express (resistivity, density, neutron) · MDT modular formation dynamics tester · GR gamma ray2,4403,843

Casing and leak-off tests

CasingDiameter, inDepth, mHole, inHole depth, mLOT/FIT, g/cm³Test
Conductor30208362080LOT
Surf.cond.201,045261,0461.56LOT
Interm.13 3/82,01917 1/22,0201.82LOT
Open hole—4,65512 1/44,6550LOT

Drilling mud

11 READINGS · BY DEPTH

Depth, mWeight, g/cm³Viscosity, mPa·sYield point, PaType
6721.0300Sw / polymer 2
1,0501.0300Sw / polymer 2
1,2201.38250Paratherm
1,4821.39290Paratherm
1,7451.39260Paratherm
2,0261.39300Paratherm
2,4001.62350Paratherm
2,5111.610Paratherm
2,746.31.6290Paratherm
2,7851.6390Paratherm
3,1961.6290Paratherm

The words under each tool string are Petrora's reading of the standard codes in it; a code we do not recognize is left as filed. No composite log has been released for this well, so there is no file to open beside these runs.

About this data

Norwegian Offshore Directorate (Sodir) FactPages, mirrored nightly and used under the Norwegian Licence for Open Government Data (NLOD). Log names are the Directorate's tool strings as filed; the plain-word readings beside them are Petrora's, from common industry abbreviations. Depths are metres along the wellbore from the kelly bushing; diameters are inches, as filed.

Developers: this page as JSON is GET /v1/data/norway/wells/5140, documented in the API reference.