NORWAY · WELLBORES · NPDID 5173

9/3-2

Exploration · Wildcat · P&A · Dry · Paladin Resources Norge AS · PL 316

4 documents: reports, logs, and plots →

What was run in 9/3-2 and how the hole was built: the logs with their intervals, the casing strings with leak-off tests, and the mud at depth.

Logs you can open: composite and completion logs on file

The table below says which logs were run and over what interval. The curves themselves are held in Diskos, Norway's national data repository; its public portal lists what has been released for a wellbore and can be ordered for an administrative fee. Diskos public portal →

Logs

LogTop, mBase, mComposite log for the well
LWD - DGR EWR P4 DIR PWDLWD logging while drilling · DGR dual gamma ray · EWR electromagnetic wave resistivity · DIR directional survey · PWD pressure while drilling2113,154On file: open →
PEX DSI AITPEX Platform Express (resistivity, density, neutron) · DSI dipole shear sonic imager · AIT array induction tool1,1443,156On file: open →

Casing and leak-off tests

CasingDiameter, inDepth, mHole, inHole depth, mLOT/FIT, g/cm³Test
Conductor30211362190LOT
Surf.cond.20501245070LOT
Interm.13 3/81,14417 1/21,1491.68LOT
Open hole—3,1548 1/23,1540LOT

Drilling mud

9 READINGS · BY DEPTH

Depth, mWeight, g/cm³Viscosity, mPa·sYield point, PaType
365100Water based
5071.0300Water based
1,1301.100Water based
1,1521.300Oil based
1,9201.3830Oil based
2,0651.3750Oil based
2,8911.35620Oil based
3,0351.35570Oil based
3,1541.35600Oil based

The words under each tool string are Petrora's reading of the standard codes in it; a code we do not recognize is left as filed. The composite log is one file for the whole well. The Directorate does not say which runs or depths it draws on, so the link is the same on every row.

About this data

Norwegian Offshore Directorate (Sodir) FactPages, mirrored nightly and used under the Norwegian Licence for Open Government Data (NLOD). Log names are the Directorate's tool strings as filed; the plain-word readings beside them are Petrora's, from common industry abbreviations. Depths are metres along the wellbore from the kelly bushing; diameters are inches, as filed.

Developers: this page as JSON is GET /v1/data/norway/wells/5173, documented in the API reference.