NORWAY · WELLBORES · NPDID 5175
15/3-8
Exploration · Appraisal · P&A · Oil/gas · Statoil ASA (old) · Gudrun · PL 025
Core 7
Core 7 of 15/3-8 was cut from 4,494 to 4,505.1 m, 11.1 m in the Intra Draupne Fm Ss. The Directorate lists core samples from it as available.
- 11.1
- m cored · 4,494 to 4,505.1
- 4
- thin sections in the interval
- 7
- log runs across it
SODIR FACTPAGES · PLACED BY DEPTH IN THIS WELLBORE
Down the core
TOP OF THE CORE AT THE TOP · TAP A MARK FOR WHAT IT IS
What it was cut through
| Unit | From, m | To, m | Core in it, m |
|---|---|---|---|
| Intra Draupne Fm Ss | 4,494 | 4,505.1 | 11.1 |
Thin sections in this interval
4 ON FILE
| Section | Depth | In |
|---|---|---|
| 3874 | 4,495 m | Intra Draupne Fm Ss |
| 3875 | 4,497.4 m | Intra Draupne Fm Ss |
| 2388 | 4,501.3 m | Intra Draupne Fm Ss |
| 3876 | 4,503.3 m | Intra Draupne Fm Ss |
Logs run across it
7 RUNS COVERING PART OF THE INTERVAL
- AIT DSI EMS GRarray induction tool · dipole shear sonic imager · environmental measurement sonde · gamma ray2,750 to 4,590 m
- OBMI-2 GRoil-base mud micro-imager · gamma ray3,900 to 4,590 m
- MWD - GR RES DIR PWD ECDmeasurement while drilling · gamma ray · resistivity · directional survey · pressure while drilling · equivalent circulating density3,910 to 4,590 m
- MSCTmechanical sidewall coring tool3,945 to 4,581 m
- MDT MINI DST SAMPLEmodular formation dynamics tester · drill-stem test3,946 to 4,514 m
- MDT PTmodular formation dynamics tester3,946 to 4,519 m
- MDTmodular formation dynamics tester4,074 to 4,514 m
Seeing the core itself
The core is held by the Norwegian Offshore Directorate in its Geobank, which has rooms for viewing and sampling by booking.
About this data
Norwegian Offshore Directorate (Sodir) FactPages, mirrored nightly and used under the Norwegian Licence for Open Government Data (NLOD). The Directorate files a core as an interval and nothing against it. Everything else on this page is on file for the wellbore and is shown here because its depth falls inside the core's interval: photographs by the interval in their title, thin sections and slides by their depth, tests and logs by overlap, units by this wellbore's own tops. Core depths are driller's depths, so a mark at the very edge can belong to the neighboring core. Reports are filed for the well, not for one core.
Developers: this page as JSON is GET /v1/data/norway/wells/5175/cores/7, documented in the API reference.