NORWAY · WELLBORES · NPDID 524

25/6-1

Exploration · Wildcat · P&A · Oil · Saga Petroleum ASA · PL 117

8 documents: reports, logs, and plots →

Core 1

Core 1 of 25/6-1 was cut from 2,289 to 2,300 m, 11 m in the Hugin Fm, Sleipner Fm, and Drake Fm. The Directorate lists core samples from it as available.

11
m cored · 2,289 to 2,300
3
formation boundaries crossed
8
log runs across it

SODIR FACTPAGES · PLACED BY DEPTH IN THIS WELLBORE

Down the core

TOP OF THE CORE AT THE TOP · TAP A MARK FOR WHAT IT IS

DEPTHFORMATIONCOREPHOTOSTHINSEC.SLIDESTESTS2,2892,300 m2,2902,2922,2942,2962,298Hugin Fm, 2,289 to 2,290 mHugin FmSleipner Fm, 2,290 to 2,297 mSleipner FmDrake Fm, 2,297 to 2,300 mDrake FmCore 1, 2,289 to 2,300 mCore 111 m

The Directorate has no photographs, thin sections, core-derived slides, or tests on file inside this core's interval. The well's core reports, where there are any, are below.

What it was cut through

UnitFrom, mTo, mCore in it, m
Hugin Fm2,2892,2901
Sleipner Fm2,2902,2977
Drake Fm2,2972,3003

Every formation top in 25/6-1 →

Logs run across it

8 RUNS COVERING PART OF THE INTERVAL

  • MWDmeasurement while drilling255 to 2,881 m
  • VSPvertical seismic profile1,700 to 2,975 m
  • CDL CNL GRcompensated densilog · compensated neutron log · gamma ray2,178 to 2,560 m
  • DIFL LSBHC GRdual induction focused log · gamma ray2,178 to 2,560 m
  • DIPLOGdipmeter2,178 to 2,558 m
  • DLL MLdual laterolog · microlog2,178 to 2,560 m
  • DLL MLLdual laterolog · microlaterolog2,178 to 2,559 m
  • SPECTRALOG2,178 to 2,560 m

Logs, casing, and the files you can open →

Seeing the core itself

The core is held by the Norwegian Offshore Directorate in its Geobank, which has rooms for viewing and sampling by booking.

The Directorate's Geobank: viewing and sampling →

About this data

Norwegian Offshore Directorate (Sodir) FactPages, mirrored nightly and used under the Norwegian Licence for Open Government Data (NLOD). The Directorate files a core as an interval and nothing against it. Everything else on this page is on file for the wellbore and is shown here because its depth falls inside the core's interval: photographs by the interval in their title, thin sections and slides by their depth, tests and logs by overlap, units by this wellbore's own tops. Core depths are driller's depths, so a mark at the very edge can belong to the neighboring core. Reports are filed for the well, not for one core.

Developers: this page as JSON is GET /v1/data/norway/wells/524/cores/1, documented in the API reference.