NORWAY · WELLBORES · NPDID 5295
6506/11-8
Exploration · Appraisal · P&A · Oil · Statoil ASA (old) · Morvin · PL 134 B
Core 2
Core 2 of 6506/11-8 was cut from 4,624 to 4,658.4 m, 34.4 m in the Garn Fm. The Directorate lists core samples from it as available.
- 34.4
- m cored · 4,624 to 4,658.4
- 8
- log runs across it
SODIR FACTPAGES · PLACED BY DEPTH IN THIS WELLBORE
Down the core
TOP OF THE CORE AT THE TOP · TAP A MARK FOR WHAT IT IS
The Directorate has no photographs, thin sections, core-derived slides, or tests on file inside this core's interval. The well's core reports, where there are any, are below.
What it was cut through
| Unit | From, m | To, m | Core in it, m |
|---|---|---|---|
| Garn Fm | 4,624 | 4,658.4 | 34.4 |
Logs run across it
8 RUNS COVERING PART OF THE INTERVAL
- MWD - ON TRACKmeasurement while drilling440 to 4,990 m
- VSI GRversatile seismic imager · gamma ray2,859 to 4,985 m
- MDT PQ SAMPLEmodular formation dynamics tester4,500 to 4,830 m
- CMR APLT ECS ACTS ECRDcombinable magnetic resonance · elemental capture spectroscopy · auxiliary compression and tension sub4,504 to 4,897 m
- PPC MSIP PPC IS AIT ACTS ECRDpowered positioning caliper · modular sonic imaging platform (Sonic Scanner) · array induction tool · auxiliary compression and tension sub4,504 to 4,897 m
- MSCT GRmechanical sidewall coring tool · gamma ray4,599 to 4,981 m
- MDT PRESSmodular formation dynamics tester · pressure4,623 to 4,870 m
- MSCT GRmechanical sidewall coring tool · gamma ray4,623 to 4,877 m
Seeing the core itself
The core is held by the Norwegian Offshore Directorate in its Geobank, which has rooms for viewing and sampling by booking.
About this data
Norwegian Offshore Directorate (Sodir) FactPages, mirrored nightly and used under the Norwegian Licence for Open Government Data (NLOD). The Directorate files a core as an interval and nothing against it. Everything else on this page is on file for the wellbore and is shown here because its depth falls inside the core's interval: photographs by the interval in their title, thin sections and slides by their depth, tests and logs by overlap, units by this wellbore's own tops. Core depths are driller's depths, so a mark at the very edge can belong to the neighboring core. Reports are filed for the well, not for one core.
Developers: this page as JSON is GET /v1/data/norway/wells/5295/cores/2, documented in the API reference.