NORWAY · WELLBORES · NPDID 5307
6507/3-5 S
Exploration · Wildcat · P&A · Gas/condensate · StatoilHydro ASA · Alve · PL 159 B
What was run in 6507/3-5 S and how the hole was built: the logs with their intervals, the casing strings with leak-off tests, and the mud at depth.
The table below says which logs were run and over what interval. The curves themselves are held in Diskos, Norway's national data repository; its public portal lists what has been released for a wellbore and can be ordered for an administrative fee. Diskos public portal →
Logs
| Log | Top, m | Base, m |
|---|---|---|
| MWD - ARCVRES9MWD measurement while drilling · ARCVRES9 arcVISION array resistivity | 448 | 2,480 |
| ACTS B ECRD VSP-VSI4 GRACTS auxiliary compression and tension sub · VSP vertical seismic profile · VSI4 versatile seismic imager · GR gamma ray | 883 | 4,255 |
| MWD - PP GVR8 ARCVRES8MWD measurement while drilling · GVR8 geoVISION resistivity · ARCVRES8 arcVISION array resistivity | 2,480 | 3,935 |
| 2XPPC IS MSIP RT+ACTS ECRDMSIP modular sonic imaging platform (Sonic Scanner) · ACTS auxiliary compression and tension sub | 2,530 | 4,266 |
| GR ECS PEX CMR +ACTS ECRDGR gamma ray · ECS elemental capture spectroscopy · PEX Platform Express (resistivity, density, neutron) · CMR combinable magnetic resonance · ACTS auxiliary compression and tension sub | 3,918 | 4,266 |
| MWD - GVR6 ARCVRES6 PPMWD measurement while drilling · GVR6 geoVISION resistivity · ARCVRES6 arcVISION array resistivity | 3,935 | 4,265 |
| ACTS ECRD MDTACTS auxiliary compression and tension sub · MDT modular formation dynamics tester | 3,960 | 4,213 |
| GR MSCTGR gamma ray · MSCT mechanical sidewall coring tool | 3,960 | 4,186 |
| EDTC B-MDT MRPAEDTC telemetry cartridge with gamma ray · MDT modular formation dynamics tester | 3,982 | 4,119 |
| EDTC B-MDT MRPAEDTC telemetry cartridge with gamma ray · MDT modular formation dynamics tester | 4,022 | 4,160 |
Casing and leak-off tests
| Casing | Diameter, in | Depth, m | Hole, in | Hole depth, m | LOT/FIT, g/cm³ | Test |
|---|---|---|---|---|---|---|
| Conductor | 30 | 448 | 36 | 456 | 0 | LOT |
| Surf.cond. | 20 | 1,238 | 26 | 1,243 | 1.57 | LOT |
| Interm. | 13 3/8 | 2,066 | 17 1/2 | 2,480 | 1.6 | LOT |
| Interm. | 9 5/8 | 3,917 | 12 1/4 | 3,935 | 1.7 | LOT |
| Open hole | — | 4,265 | 8 1/2 | 4,265 | 0 | LOT |
Drilling mud
30 READINGS · BY DEPTH
| Depth, m | Weight, g/cm³ | Viscosity, mPa·s | Yield point, Pa | Type |
|---|---|---|---|---|
| 1,055 | 1.5 | 40 | 0 | Carbosea |
| 1,235 | 1.52 | 21 | 0 | Aquadrill |
| 1,246 | 1.25 | 16 | 0 | Aquadrill |
| 1,442 | 1.28 | 13 | 0 | Aquadrill |
| 1,500 | 1.52 | 24 | 0 | Aquadrill |
| 1,515 | 1.51 | 26 | 0 | Aquadrill |
| 1,759 | 1.59 | 53 | 0 | Carbosea |
| 1,907 | 1.41 | 18 | 0 | Aquadrill |
| 1,931 | 1.59 | 53 | 0 | Carbosea |
| 2,000 | 1.59 | 64 | 0 | Carbosea |
| 2,033 | 1.59 | 60 | 0 | Carbosea |
| 2,066 | 1.54 | 20 | 0 | Aquadrill |
| 2,130 | 1.59 | 61 | 0 | Carbosea |
| 2,140 | 1.52 | 29 | 0 | Aquadrill |
| 2,257 | 1.52 | 21 | 0 | Aquadrill |
| 2,449 | 1.51 | 27 | 0 | Aquadrill |
| 2,480 | 1.51 | 26 | 0 | Aquadrill |
| 2,508 | 1.54 | 34 | 0 | Carbosea |
| 2,767 | 1.54 | 40 | 0 | Carbosea |
| 3,000 | 1.54 | 42 | 0 | Carbosea |
| 3,395 | 1.55 | 52 | 0 | Carbosea |
| 3,728 | 1.56 | 52 | 0 | Carbosea |
| 3,935 | 1.59 | 64 | 0 | Carbosea |
| 3,959 | 1.5 | 53 | 0 | Carbosea |
| 4,013 | 1.5 | 42 | 0 | Carbosea |
| 4,145 | 1.5 | 42 | 0 | Carbosea |
| 4,180 | 1.5 | 42 | 0 | Carbosea |
| 4,203 | 1.5 | 42 | 0 | Carbosea |
| 4,265 | 1.5 | 44 | 0 | Carbosea |
| 4,580 | 1.5 | 40 | 0 | Carbosea |
The words under each tool string are Petrora's reading of the standard codes in it; a code we do not recognize is left as filed. No composite log has been released for this well, so there is no file to open beside these runs.
About this data
Norwegian Offshore Directorate (Sodir) FactPages, mirrored nightly and used under the Norwegian Licence for Open Government Data (NLOD). Log names are the Directorate's tool strings as filed; the plain-word readings beside them are Petrora's, from common industry abbreviations. Depths are metres along the wellbore from the kelly bushing; diameters are inches, as filed.
Developers: this page as JSON is GET /v1/data/norway/wells/5307, documented in the API reference.