NORWAY · WELLBORES · NPDID 5365
35/11-14 S
Exploration · Appraisal · P&A · Oil/gas · Norsk Hydro Petroleum AS · Byrding · PL 090 B
Core 2
Core 2 of 35/11-14 S was cut from 3,137 to 3,163.8 m, 26.8 m in the Intra Heather Fm Ss. The Directorate lists core samples from it as available.
- 26.8
- m cored · 3,137 to 3,163.8
- 5
- log runs across it
SODIR FACTPAGES · PLACED BY DEPTH IN THIS WELLBORE
Down the core
TOP OF THE CORE AT THE TOP · TAP A MARK FOR WHAT IT IS
The Directorate has no photographs, thin sections, core-derived slides, or tests on file inside this core's interval. The well's core reports, where there are any, are below.
What it was cut through
| Unit | From, m | To, m | Core in it, m |
|---|---|---|---|
| Intra Heather Fm Ss | 3,137 | 3,163.8 | 26.8 |
Palynology slides made from core
0 IN THE INTERVAL
26 more slides were made from cuttings or sidewall cores at depths inside this interval, not from the core itself. Every slide from the well →
Logs run across it
5 RUNS COVERING PART OF THE INTERVAL
- MWD LWD - DIR GR RES APWDmeasurement while drilling · logging while drilling · directional survey · gamma ray · resistivity · annular pressure while drilling468 to 3,306 m
- SPEA GPIT DSI HRLA PEX ECS CMRinclinometry tool · dipole shear sonic imager · high-resolution laterolog array · Platform Express (resistivity, density, neutron) · elemental capture spectroscopy · combinable magnetic resonance2,700 to 3,307 m
- CMR CALcombinable magnetic resonance · caliper2,740 to 3,240 m
- MDTmodular formation dynamics tester3,104 to 3,250 m
- MDT DP VIT HCmodular formation dynamics tester3,105 to 3,141 m
Seeing the core itself
The core is held by the Norwegian Offshore Directorate in its Geobank, which has rooms for viewing and sampling by booking.
About this data
Norwegian Offshore Directorate (Sodir) FactPages, mirrored nightly and used under the Norwegian Licence for Open Government Data (NLOD). The Directorate files a core as an interval and nothing against it. Everything else on this page is on file for the wellbore and is shown here because its depth falls inside the core's interval: photographs by the interval in their title, thin sections and slides by their depth, tests and logs by overlap, units by this wellbore's own tops. Core depths are driller's depths, so a mark at the very edge can belong to the neighboring core. Reports are filed for the well, not for one core.
Developers: this page as JSON is GET /v1/data/norway/wells/5365/cores/2, documented in the API reference.