NORWAY · WELLBORES · NPDID 5454

6406/9-2

Exploration · Appraisal · P&A · Gas · A/S Norske Shell · PL 255

2 documents: reports, logs, and plots →

Core 2

Core 2 of 6406/9-2 was cut from 5,096 to 5,100.3 m, 4.3 m in the Tilje Fm. The Directorate lists core samples from it as available.

4.3
m cored · 5,096 to 5,100.3
6
log runs across it

SODIR FACTPAGES · PLACED BY DEPTH IN THIS WELLBORE

Down the core

TOP OF THE CORE AT THE TOP · TAP A MARK FOR WHAT IT IS

DEPTHFORMATIONCOREPHOTOSTHINSEC.SLIDESTESTS5,0965,100.3 m5,098Tilje Fm, 5,096 to 5,100.3 mTilje FmCore 2, 5,096 to 5,100.3 mCore 24.3 m2.7 m not cored

The Directorate has no photographs, thin sections, core-derived slides, or tests on file inside this core's interval. The well's core reports, where there are any, are below.

What it was cut through

UnitFrom, mTo, mCore in it, m
Tilje Fm5,0965,100.34.3

Every formation top in 6406/9-2 →

Logs run across it

6 RUNS COVERING PART OF THE INTERVAL

  • MWD ARC - GR RES APWDmeasurement while drilling · array resistivity compensated · gamma ray · resistivity · annular pressure while drilling402 to 5,333 m
  • QAIT QSLT QLDT QCNT ECS HR LEHelemental capture spectroscopy4,458 to 5,327 m
  • QAIT QSLT QLDT QCNT ECS HR LEHelemental capture spectroscopy4,458 to 5,327 m
  • MDT GR LEH ECRImodular formation dynamics tester · gamma ray4,766 to 5,125 m
  • MDT GR LEH ECRImodular formation dynamics tester · gamma ray4,795 to 5,235 m
  • MDT GR KEH ECRImodular formation dynamics tester · gamma ray4,826 to 5,125 m

Logs, casing, and the files you can open →

Seeing the core itself

The core is held by the Norwegian Offshore Directorate in its Geobank, which has rooms for viewing and sampling by booking.

The Directorate's Geobank: viewing and sampling →

About this data

Norwegian Offshore Directorate (Sodir) FactPages, mirrored nightly and used under the Norwegian Licence for Open Government Data (NLOD). The Directorate files a core as an interval and nothing against it. Everything else on this page is on file for the wellbore and is shown here because its depth falls inside the core's interval: photographs by the interval in their title, thin sections and slides by their depth, tests and logs by overlap, units by this wellbore's own tops. Core depths are driller's depths, so a mark at the very edge can belong to the neighboring core. Reports are filed for the well, not for one core.

Developers: this page as JSON is GET /v1/data/norway/wells/5454/cores/2, documented in the API reference.