NORWAY · WELLBORES · NPDID 5494
15/6-9 S
Exploration · Appraisal · P&A · Oil/gas · Statoil ASA (old) · Gina Krog · PL 303
Core 1
Core 1 of 15/6-9 S was cut from 3,761.3 to 3,810.7 m, 49.4 m in the Hugin Fm and Sleipner Fm. The Directorate lists core samples from it as available.
- 49.4
- m cored · 3,761.3 to 3,810.7
- 1
- formation boundary crossed
- 7
- log runs across it
SODIR FACTPAGES · PLACED BY DEPTH IN THIS WELLBORE
Down the core
TOP OF THE CORE AT THE TOP · TAP A MARK FOR WHAT IT IS
The Directorate has no photographs, thin sections, core-derived slides, or tests on file inside this core's interval. The well's core reports, where there are any, are below.
What it was cut through
| Unit | From, m | To, m | Core in it, m |
|---|---|---|---|
| Hugin Fm | 3,761.3 | 3,794 | 32.7 |
| Sleipner Fm | 3,794 | 3,810.7 | 16.7 |
Logs run across it
7 RUNS COVERING PART OF THE INTERVAL
- VSP VSI-4vertical seismic profile · versatile seismic imager800 to 3,940 m
- PEX HRLA DSI ACTS ECRDPlatform Express (resistivity, density, neutron) · high-resolution laterolog array · dipole shear sonic imager · auxiliary compression and tension sub2,786 to 3,940 m
- MWD - GEO VISION SEISMICmeasurement while drilling2,797 to 3,940 m
- MSCTmechanical sidewall coring tool2,899 to 3,940 m
- MDTmodular formation dynamics tester3,758 to 3,851 m
- MDTmodular formation dynamics tester3,761 to 3,791 m
- MDTmodular formation dynamics tester3,763 to 3,804 m
Seeing the core itself
The core is held by the Norwegian Offshore Directorate in its Geobank, which has rooms for viewing and sampling by booking.
About this data
Norwegian Offshore Directorate (Sodir) FactPages, mirrored nightly and used under the Norwegian Licence for Open Government Data (NLOD). The Directorate files a core as an interval and nothing against it. Everything else on this page is on file for the wellbore and is shown here because its depth falls inside the core's interval: photographs by the interval in their title, thin sections and slides by their depth, tests and logs by overlap, units by this wellbore's own tops. Core depths are driller's depths, so a mark at the very edge can belong to the neighboring core. Reports are filed for the well, not for one core.
Developers: this page as JSON is GET /v1/data/norway/wells/5494/cores/1, documented in the API reference.