NORWAY · WELLBORES · NPDID 5550
6407/7-7 S
Exploration · Wildcat · P&A · Gas/condensate · Norsk Hydro Petroleum AS · Njord · PL 107
Core 3
Core 3 of 6407/7-7 S was cut from 3,605 to 3,633.2 m, 28.2 m in the Tilje Fm. The Directorate lists core samples from it as available.
- 28.2
- m cored · 3,605 to 3,633.2
- 7
- log runs across it
SODIR FACTPAGES · PLACED BY DEPTH IN THIS WELLBORE
Down the core
TOP OF THE CORE AT THE TOP · TAP A MARK FOR WHAT IT IS
The Directorate has no photographs, thin sections, core-derived slides, or tests on file inside this core's interval. The well's core reports, where there are any, are below.
What it was cut through
| Unit | From, m | To, m | Core in it, m |
|---|---|---|---|
| Tilje Fm | 3,605 | 3,633.2 | 28.2 |
Logs run across it
7 RUNS COVERING PART OF THE INTERVAL
- VI VSP WA VSPvertical seismic profile1,103 to 3,870 m
- RT-SCANER SON-SCANNERsonic1,905 to 3,890 m
- PEX ECSPlatform Express (resistivity, density, neutron) · elemental capture spectroscopy2,270 to 3,885 m
- CMR XPTcombinable magnetic resonance · formation pressure tester (PressureXpress)3,180 to 3,880 m
- GR RES DEN NEU BAT DIR PWDgamma ray · resistivity · density · neutron · bimodal acoustic (sonic) · directional survey · pressure while drilling3,182 to 3,886 m
- MDT (PS SC 2MS PQ)modular formation dynamics tester3,397 to 3,664 m
- MDT (2MS LFA PS PA) TLCmodular formation dynamics tester · drillpipe-conveyed logging3,733 to 3,300 m
Seeing the core itself
The core is held by the Norwegian Offshore Directorate in its Geobank, which has rooms for viewing and sampling by booking.
About this data
Norwegian Offshore Directorate (Sodir) FactPages, mirrored nightly and used under the Norwegian Licence for Open Government Data (NLOD). The Directorate files a core as an interval and nothing against it. Everything else on this page is on file for the wellbore and is shown here because its depth falls inside the core's interval: photographs by the interval in their title, thin sections and slides by their depth, tests and logs by overlap, units by this wellbore's own tops. Core depths are driller's depths, so a mark at the very edge can belong to the neighboring core. Reports are filed for the well, not for one core.
Developers: this page as JSON is GET /v1/data/norway/wells/5550/cores/3, documented in the API reference.