NORWAY · WELLBORES · NPDID 5917

34/7-33

Exploration · Wildcat · P&A · Shows · StatoilHydro ASA · PL 089

2 documents: reports, logs, and plots →

Core 2

Core 2 of 34/7-33 was cut from 1,798 to 1,825 m, 27 m in the Lista Fm. The Directorate lists core samples from it as available.

27
m cored · 1,798 to 1,825
5
log runs across it

SODIR FACTPAGES · PLACED BY DEPTH IN THIS WELLBORE

Down the core

TOP OF THE CORE AT THE TOP · TAP A MARK FOR WHAT IT IS

DEPTHFORMATIONCOREPHOTOSTHINSEC.SLIDESTESTS1,7981,825 m1,8001,8051,8101,8151,820Lista Fm, 1,798 to 1,825 mLista FmCore 2, 1,798 to 1,825 mCore 227 m

The Directorate has no photographs, thin sections, core-derived slides, or tests on file inside this core's interval. The well's core reports, where there are any, are below.

What it was cut through

UnitFrom, mTo, mCore in it, m
Lista Fm1,7981,82527

Every formation top in 34/7-33 →

Logs run across it

5 RUNS COVERING PART OF THE INTERVAL

  • VSPvertical seismic profile955 to 2,560 m
  • PEX HRLA DSIPlatform Express (resistivity, density, neutron) · high-resolution laterolog array · dipole shear sonic imager1,420 to 2,245 m
  • PEX HRLA DSIPlatform Express (resistivity, density, neutron) · high-resolution laterolog array · dipole shear sonic imager1,555 to 2,607 m
  • MWD LWD - POWERPULSE ARCmeasurement while drilling · logging while drilling · PowerPulse telemetry · array resistivity compensated1,583 to 2,271 m
  • MDT GRmodular formation dynamics tester · gamma ray1,790 to 1,850 m

Logs, casing, and the files you can open →

Seeing the core itself

The core is held by the Norwegian Offshore Directorate in its Geobank, which has rooms for viewing and sampling by booking.

The Directorate's Geobank: viewing and sampling →

About this data

Norwegian Offshore Directorate (Sodir) FactPages, mirrored nightly and used under the Norwegian Licence for Open Government Data (NLOD). The Directorate files a core as an interval and nothing against it. Everything else on this page is on file for the wellbore and is shown here because its depth falls inside the core's interval: photographs by the interval in their title, thin sections and slides by their depth, tests and logs by overlap, units by this wellbore's own tops. Core depths are driller's depths, so a mark at the very edge can belong to the neighboring core. Reports are filed for the well, not for one core.

Developers: this page as JSON is GET /v1/data/norway/wells/5917/cores/2, documented in the API reference.