NORWAY · WELLBORES · NPDID 5931

6707/10-2 A

Exploration · Wildcat · P&A · Gas · StatoilHydro ASA · PL 218

2 documents: reports, logs, and plots →

Core 2

Core 2 of 6707/10-2 A was cut from 4,461 to 4,487.8 m, 26.8 m in the Kvitnos Fm. The Directorate lists core samples from it as available.

26.8
m cored · 4,461 to 4,487.8
4
log runs across it

SODIR FACTPAGES · PLACED BY DEPTH IN THIS WELLBORE

Down the core

TOP OF THE CORE AT THE TOP · TAP A MARK FOR WHAT IT IS

DEPTHFORMATIONCOREPHOTOSTHINSEC.SLIDESTESTS4,4614,487.8 m4,4654,4704,4754,4804,485Kvitnos Fm, 4,461 to 4,487.8 mKvitnos FmCore 2, 4,461 to 4,487.8 mCore 226.8 m

The Directorate has no photographs, thin sections, core-derived slides, or tests on file inside this core's interval. The well's core reports, where there are any, are below.

What it was cut through

UnitFrom, mTo, mCore in it, m
Kvitnos Fm4,4614,487.826.8

Every formation top in 6707/10-2 A →

Logs run across it

4 RUNS COVERING PART OF THE INTERVAL

  • VSI-4versatile seismic imager2,013 to 4,530 m
  • MWD - ECOSCOPE TELESCOPE VSONIC6measurement while drilling3,288 to 4,850 m
  • MDT - MINI DSTmodular formation dynamics tester · drill-stem test3,966 to 4,807 m
  • AIT PEX DSI HNGSarray induction tool · Platform Express (resistivity, density, neutron) · dipole shear sonic imager · spectral gamma ray (hostile environment)4,112 to 4,826 m

Logs, casing, and the files you can open →

Seeing the core itself

The core is held by the Norwegian Offshore Directorate in its Geobank, which has rooms for viewing and sampling by booking.

The Directorate's Geobank: viewing and sampling →

About this data

Norwegian Offshore Directorate (Sodir) FactPages, mirrored nightly and used under the Norwegian Licence for Open Government Data (NLOD). The Directorate files a core as an interval and nothing against it. Everything else on this page is on file for the wellbore and is shown here because its depth falls inside the core's interval: photographs by the interval in their title, thin sections and slides by their depth, tests and logs by overlap, units by this wellbore's own tops. Core depths are driller's depths, so a mark at the very edge can belong to the neighboring core. Reports are filed for the well, not for one core.

Developers: this page as JSON is GET /v1/data/norway/wells/5931/cores/2, documented in the API reference.