NORWAY · WELLBORES · NPDID 6085
30/11-7 A
Exploration · Appraisal · P&A · Gas/condensate · StatoilHydro Petroleum AS · Fulla · PL 035 B
What was run in 30/11-7 A and how the hole was built: the logs with their intervals, the casing strings with leak-off tests, and the mud at depth.
The table below says which logs were run and over what interval. The curves themselves are held in Diskos, Norway's national data repository; its public portal lists what has been released for a wellbore and can be ordered for an administrative fee. Diskos public portal →
Logs
| Log | Top, m | Base, m |
|---|---|---|
| WAVSP | 785 | 3,417 |
| MSIPMSIP modular sonic imaging platform (Sonic Scanner) | 3,417 | 4,235 |
| PEX AITPEX Platform Express (resistivity, density, neutron) · AIT array induction tool | 3,417 | 4,248 |
| MWD LWD - ARCVRES6MWD measurement while drilling · LWD logging while drilling · ARCVRES6 arcVISION array resistivity | 3,419 | 3,562 |
| MWD - STET. ARCVRES6 GVR6 TELEMWD measurement while drilling · STET StethoScope formation pressure while drilling · ARCVRES6 arcVISION array resistivity · GVR6 geoVISION resistivity · TELE TeleScope telemetry | 3,419 | 3,562 |
| MWD - STET TELE ARCVRES6 GVR6MWD measurement while drilling · STET StethoScope formation pressure while drilling · TELE TeleScope telemetry · ARCVRES6 arcVISION array resistivity · GVR6 geoVISION resistivity | 3,562 | 3,865 |
| MWD - ECOS GVR6 ARCVRES6 STETMWD measurement while drilling · GVR6 geoVISION resistivity · ARCVRES6 arcVISION array resistivity · STET StethoScope formation pressure while drilling | 3,865 | 4,022 |
| MWD - ARCVRES6MWD measurement while drilling · ARCVRES6 arcVISION array resistivity | 4,000 | 4,250 |
| MDTMDT modular formation dynamics tester | 4,008 | 4,237 |
| MDT MRPQMDT modular formation dynamics tester | 4,008 | 4,047 |
| MDT MRPA (TLC)MDT modular formation dynamics tester · TLC drillpipe-conveyed logging | 4,077 | 4,231 |
Casing and leak-off tests
| Casing | Diameter, in | Depth, m | Hole, in | Hole depth, m | LOT/FIT, g/cm³ | Test |
|---|---|---|---|---|---|---|
| Interm. | 9 5/8 | 3,417 | 12 1/4 | 3,419 | 2.01 | LOT |
| Open hole | — | 4,250 | 8 1/2 | 4,250 | 0 | LOT |
Drilling mud
19 READINGS · BY DEPTH
| Depth, m | Weight, g/cm³ | Viscosity, mPa·s | Yield point, Pa | Type |
|---|---|---|---|---|
| 194 | 1.48 | 30 | 0 | Versatec |
| 660 | 1.48 | 30 | 0 | Versatec |
| 2,720 | 1.48 | 26 | 0 | Versatec |
| 2,982 | 1.53 | 40 | 0 | Versatec |
| 3,078 | 1.61 | 40 | 0 | Versatec |
| 3,343 | 1.75 | 40 | 0 | Versatec |
| 3,343 | 1.6 | 29 | 0 | Versatec |
| 3,419 | 1.76 | 42 | 0 | Versatec |
| 3,450 | 1.83 | 39 | 0 | Versatec |
| 3,562 | 1.9 | 44 | 0 | Versatec |
| 3,735 | 1.89 | 43 | 0 | Versatec |
| 3,865 | 1.91 | 47 | 0 | Versatec |
| 3,881 | 1.9 | 45 | 0 | Versatec |
| 4,022 | 1.91 | 47 | 0 | Versatec |
| 4,039 | 1.91 | 49 | 0 | Versatec |
| 4,096 | 1.91 | 48 | 0 | Versatec |
| 4,123 | 1.91 | 50 | 0 | Versatec |
| 4,250 | 1.91 | 53 | 0 | Versatec |
| 4,250 | 1.91 | 53 | 0 | Versatec |
The words under each tool string are Petrora's reading of the standard codes in it; a code we do not recognize is left as filed. No composite log has been released for this well, so there is no file to open beside these runs.
About this data
Norwegian Offshore Directorate (Sodir) FactPages, mirrored nightly and used under the Norwegian Licence for Open Government Data (NLOD). Log names are the Directorate's tool strings as filed; the plain-word readings beside them are Petrora's, from common industry abbreviations. Depths are metres along the wellbore from the kelly bushing; diameters are inches, as filed.
Developers: this page as JSON is GET /v1/data/norway/wells/6085, documented in the API reference.