NORWAY · WELLBORES · NPDID 6095

35/12-2

Exploration · Wildcat · P&A · Oil/gas · Wintershall Norge ASA · PL 378

1 document: reports, logs, and plots →

Core 2

Core 2 of 35/12-2 was cut from 2,028 to 2,055 m, 27 m in the Sognefjord Fm and Heather Fm. The Directorate lists core samples from it as available.

27
m cored · 2,028 to 2,055
1
formation boundary crossed
4
log runs across it

SODIR FACTPAGES · PLACED BY DEPTH IN THIS WELLBORE

Down the core

TOP OF THE CORE AT THE TOP · TAP A MARK FOR WHAT IT IS

DEPTHFORMATIONCOREPHOTOSTHINSEC.SLIDESTESTS2,0282,055 m2,0302,0352,0402,0452,050Sognefjord Fm, 2,028 to 2,030 mSognefjord FmHeather Fm, 2,030 to 2,055 mHeather FmCore 2, 2,028 to 2,055 mCore 227 m

The Directorate has no photographs, thin sections, core-derived slides, or tests on file inside this core's interval. The well's core reports, where there are any, are below.

What it was cut through

UnitFrom, mTo, mCore in it, m
Sognefjord Fm2,0282,0302
Heather Fm2,0302,05525

Every formation top in 35/12-2 →

Logs run across it

4 RUNS COVERING PART OF THE INTERVAL

  • VSPvertical seismic profile840 to 2,451 m
  • RCI GRreservoir characterization instrument · gamma ray1,971 to 2,531 m
  • LWD - DIR GR RES DEN NUT SON PWDlogging while drilling · directional survey · gamma ray · resistivity · density · sonic · pressure while drilling1,975 to 2,541 m
  • RCI GRreservoir characterization instrument · gamma ray1,996 to 2,101 m

Logs, casing, and the files you can open →

Seeing the core itself

The core is held by the Norwegian Offshore Directorate in its Geobank, which has rooms for viewing and sampling by booking.

The Directorate's Geobank: viewing and sampling →

About this data

Norwegian Offshore Directorate (Sodir) FactPages, mirrored nightly and used under the Norwegian Licence for Open Government Data (NLOD). The Directorate files a core as an interval and nothing against it. Everything else on this page is on file for the wellbore and is shown here because its depth falls inside the core's interval: photographs by the interval in their title, thin sections and slides by their depth, tests and logs by overlap, units by this wellbore's own tops. Core depths are driller's depths, so a mark at the very edge can belong to the neighboring core. Reports are filed for the well, not for one core.

Developers: this page as JSON is GET /v1/data/norway/wells/6095/cores/2, documented in the API reference.