NORWAY · WELLBORES · NPDID 6182

30/9-23

Exploration · Wildcat · P&A · Dry · StatoilHydro Petroleum AS · PL 104

1 document: reports, logs, and plots →

What was run in 30/9-23 and how the hole was built: the logs with their intervals, the casing strings with leak-off tests, and the mud at depth.

The table below says which logs were run and over what interval. The curves themselves are held in Diskos, Norway's national data repository; its public portal lists what has been released for a wellbore and can be ordered for an administrative fee. Diskos public portal →

Logs

LogTop, mBase, m
MWD LWD - ARCFVRES6 TELESCOPEMWD measurement while drilling · LWD logging while drilling1912,092
DSI XPTDSI dipole shear sonic imager · XPT formation pressure tester (PressureXpress)9292,873
PEX HRLAPEX Platform Express (resistivity, density, neutron) · HRLA high-resolution laterolog array2,0822,873
MWD LWD - ARCVRES6 GVR6 TELESCOPMWD measurement while drilling · LWD logging while drilling · ARCVRES6 arcVISION array resistivity · GVR6 geoVISION resistivity2,0922,873

Casing and leak-off tests

CasingDiameter, inDepth, mHole, inHole depth, mLOT/FIT, g/cm³Test
Conductor30189361920LOT
Pilot hole—5109 7/85100LOT
Surf.cond.13 3/899717 1/21,0031.64LOT
Interm.9 5/82,08212 1/42,0921.72LOT
Open hole—2,8738 1/22,8730LOT

Drilling mud

7 READINGS · BY DEPTH

Depth, mWeight, g/cm³Viscosity, mPa·sYield point, PaType
1,0031.35240Glydril
1,0051.27140Glydril
1,3001.37180Glydril
1,9551.4180Glydril
2,0921.43200Glydril
2,4241.25150Glydril
2,8731.25160Glydril

The words under each tool string are Petrora's reading of the standard codes in it; a code we do not recognize is left as filed. No composite log has been released for this well, so there is no file to open beside these runs.

About this data

Norwegian Offshore Directorate (Sodir) FactPages, mirrored nightly and used under the Norwegian Licence for Open Government Data (NLOD). Log names are the Directorate's tool strings as filed; the plain-word readings beside them are Petrora's, from common industry abbreviations. Depths are metres along the wellbore from the kelly bushing; diameters are inches, as filed.

Developers: this page as JSON is GET /v1/data/norway/wells/6182, documented in the API reference.