NORWAY · WELLBORES · NPDID 6249

34/3-2 S

Exploration · Wildcat · P&A · Shows · BG Norge AS · PL 373 S

1 document: reports, logs, and plots →

Core 1

Core 1 of 34/3-2 S was cut from 4,053 to 4,079.9 m, 26.9 m in the Cook Fm. The Directorate lists core samples from it as available.

26.9
m cored · 4,053 to 4,079.9
8
log runs across it

SODIR FACTPAGES · PLACED BY DEPTH IN THIS WELLBORE

Down the core

TOP OF THE CORE AT THE TOP · TAP A MARK FOR WHAT IT IS

DEPTHFORMATIONCOREPHOTOSTHINSEC.SLIDESTESTS4,0534,079.9 m4,0554,0604,0654,0704,075Cook Fm, 4,053 to 4,079.9 mCook FmCore 1, 4,053 to 4,079.9 mCore 126.9 m

The Directorate has no photographs, thin sections, core-derived slides, or tests on file inside this core's interval. The well's core reports, where there are any, are below.

What it was cut through

UnitFrom, mTo, mCore in it, m
Cook Fm4,0534,079.926.8

Every formation top in 34/3-2 S →

Logs run across it

8 RUNS COVERING PART OF THE INTERVAL

  • VSIversatile seismic imager479 to 4,310 m
  • MSCTmechanical sidewall coring tool3,495 to 4,300 m
  • AIT APS LDS GRarray induction tool · accelerator porosity sonde · litho-density sonde · gamma ray3,789 to 4,342 m
  • OBMI DSIoil-base mud micro-imager · dipole shear sonic imager3,798 to 4,344 m
  • ECS HNGSelemental capture spectroscopy · spectral gamma ray (hostile environment)3,826 to 4,335 m
  • LWD - GR RES NEU DEN ECSlogging while drilling · gamma ray · resistivity · neutron · density · elemental capture spectroscopy3,860 to 4,331 m
  • CMRcombinable magnetic resonance3,878 to 4,336 m
  • MDTmodular formation dynamics tester4,045 to 4,290 m

Logs, casing, and the files you can open →

Seeing the core itself

The core is held by the Norwegian Offshore Directorate in its Geobank, which has rooms for viewing and sampling by booking.

The Directorate's Geobank: viewing and sampling →

About this data

Norwegian Offshore Directorate (Sodir) FactPages, mirrored nightly and used under the Norwegian Licence for Open Government Data (NLOD). The Directorate files a core as an interval and nothing against it. Everything else on this page is on file for the wellbore and is shown here because its depth falls inside the core's interval: photographs by the interval in their title, thin sections and slides by their depth, tests and logs by overlap, units by this wellbore's own tops. Core depths are driller's depths, so a mark at the very edge can belong to the neighboring core. Reports are filed for the well, not for one core.

Developers: this page as JSON is GET /v1/data/norway/wells/6249/cores/1, documented in the API reference.