NORWAY · WELLBORES · NPDID 6306

6608/10-14 S

Exploration · Wildcat · P&A · Oil/gas · Statoil Petroleum AS · Skuld · PL 128

2 documents: reports, logs, and plots →

Core 3

Core 3 of 6608/10-14 S was cut from 2,605 to 2,659 m, 54 m in the Åre Fm. The Directorate lists core samples from it as available.

54
m cored · 2,605 to 2,659
6
log runs across it

SODIR FACTPAGES · PLACED BY DEPTH IN THIS WELLBORE

Down the core

TOP OF THE CORE AT THE TOP · TAP A MARK FOR WHAT IT IS

DEPTHFORMATIONCOREPHOTOSTHINSEC.SLIDESTESTS2,6052,659 m2,6102,6202,6302,6402,650Åre Fm, 2,605 to 2,659 mÅre FmCore 3, 2,605 to 2,659 mCore 354 m

The Directorate has no photographs, thin sections, core-derived slides, or tests on file inside this core's interval. The well's core reports, where there are any, are below.

What it was cut through

UnitFrom, mTo, mCore in it, m
Åre Fm2,6052,65954

Every formation top in 6608/10-14 S →

Logs run across it

6 RUNS COVERING PART OF THE INTERVAL

  • CMR ECScombinable magnetic resonance · elemental capture spectroscopy2,394 to 2,880 m
  • MSIPmodular sonic imaging platform (Sonic Scanner)2,394 to 2,880 m
  • PEX AITPlatform Express (resistivity, density, neutron) · array induction tool2,394 to 2,704 m
  • PEX AITPlatform Express (resistivity, density, neutron) · array induction tool2,394 to 2,880 m
  • MDTmodular formation dynamics tester2,436 to 2,692 m
  • MDTmodular formation dynamics tester2,549 to 2,871 m

Logs, casing, and the files you can open →

Seeing the core itself

The core is held by the Norwegian Offshore Directorate in its Geobank, which has rooms for viewing and sampling by booking.

The Directorate's Geobank: viewing and sampling →

About this data

Norwegian Offshore Directorate (Sodir) FactPages, mirrored nightly and used under the Norwegian Licence for Open Government Data (NLOD). The Directorate files a core as an interval and nothing against it. Everything else on this page is on file for the wellbore and is shown here because its depth falls inside the core's interval: photographs by the interval in their title, thin sections and slides by their depth, tests and logs by overlap, units by this wellbore's own tops. Core depths are driller's depths, so a mark at the very edge can belong to the neighboring core. Reports are filed for the well, not for one core.

Developers: this page as JSON is GET /v1/data/norway/wells/6306/cores/3, documented in the API reference.