NORWAY · WELLBORES · NPDID 6307

34/5-1 S

Exploration · Wildcat · P&A · Oil · BG Norge AS · PL 374 S

1 document: reports, logs, and plots →

34/5-1 S is a wildcat exploration wellbore in the North Sea, drilled by BG Norge AS, entered Jan 7, 2010, to 3,900 m in the Statfjord Gp.

Discovery 34/5-1 S · On the map →

3,900
m total depth · 3,737 m vertical
387
m water depth
Jan 7, 2010
entered · completed Mar 13, 2010
Statfjord Gp
at total depth · Early Jurassic
48.4
m of core in 2 cores
135
°C bottom-hole temperature

SODIR FACTPAGES · RECORD UPDATED FEB 20, 2026 · RELEASED MAR 13, 2012

On file for this wellbore

What the Directorate holds from this wellbore. Each opens the section that lists it.

Drilling

Drilling facility
BREDFORD DOLPHIN · Semisub steel
Drilling days
66
Kelly bushing elevation
25 m
Maximum inclination
35.59999847°
Drilling permit
1292-L
Licensing round
TFO2005
Plugged and abandoned
—
Core samples available
Yes
Cuttings samples available
Yes
Position · ED50
61.74311° N, 2.59871° E
Hydrocarbons in
Cook Fm · Early Jurassic

Well history

WRITTEN BY THE NORWEGIAN OFFSHORE DIRECTORATE

General

Well 34/5-1 S was drilled on the Blåbær prospect in Tampen North in the northern North Sea, ca 10 km to the southwest the 34/3-1 S Jordbær discovery. The objective was to prove hydrocarbons in the Cook and Statfjord formations.

Operations and results

Wildcat well 34/5-1 S was spudded with the semi-submersible installation Bredford Dolphin on 7 January 2010 and drilled to TD at 3900 m (3737 m TVD) in the Early Jurassic Statfjord Formation. The spud location was selected to avoid an area with risk of possible shallow gas. It was drilled vertical down to the end of the 17 1/2" section at 2135 m, deviated to maximum 35 degrees through the 12 1/4" section and back to vertical in the deepest 100 m of the final 8 1/2" section. Some hole problems were encountered in the 17 1/2" section, believed to be caused by the hole being left open too long due to WOW, otherwise operations went forth without significant problems. The well was drilled with seawater and hi-vis sweeps down to 467 m, with KCl/Glycol Enhanced Mud (GEM) from 467 m to 2135 m, and with XP-07 oil based mud from 2135 m to TD.

Top Cook (Late Pliensbachian) reservoir came in at 3629 m, 57 m shallower than the pre-drill prediction. The Cook Formation sandstones had an average porosity of 18.3% and 20 m of net sand based on a 50% Vsh cut-off and 10% porosity. The secondary target Statfjord Formation was penetrated at 3834 m, 55 m shallower than prognosed. Statfjord was inferred to be water bearing from the LWD data. An extensive wire line programme was carried out after reaching TD. After analysing the acquired data it was concluded that the Cook reservoir was oil bearing. The lower Cook interval showed the best reservoir quality with average porosity of

Around this wellbore

This wellbore on Sodir FactPages → · Press release →

About this data

Norwegian Offshore Directorate (Sodir) FactPages, mirrored nightly and used under the Norwegian Licence for Open Government Data (NLOD). Depths are metres along the wellbore from the kelly bushing unless a row gives its own unit; older cores are filed in feet. A zero the Directorate files for an unmeasured pressure, density, or temperature is shown as a dash.

Developers: this page as JSON is GET /v1/data/norway/wells/6307, documented in the API reference.