NORWAY · WELLBORES · NPDID 6350

6406/3-8

Exploration · Wildcat · P&A · Oil · Wintershall Norge ASA · Maria · PL 475 BS

4 documents: reports, logs, and plots →

Core 2

Core 2 of 6406/3-8 was cut from 3,874 to 3,929.6 m, 55.6 m in the Garn Fm. The Directorate lists core samples from it as available.

55.6
m cored · 3,874 to 3,929.6
6
log runs across it

SODIR FACTPAGES · PLACED BY DEPTH IN THIS WELLBORE

Down the core

TOP OF THE CORE AT THE TOP · TAP A MARK FOR WHAT IT IS

DEPTHFORMATIONCOREPHOTOSTHINSEC.SLIDESTESTS3,8743,929.6 m3,8803,8903,9003,9103,920Garn Fm, 3,874 to 3,929.6 mGarn FmCore 2, 3,874 to 3,929.6 mCore 255.6 m

The Directorate has no photographs, thin sections, core-derived slides, or tests on file inside this core's interval. The well's core reports, where there are any, are below.

What it was cut through

UnitFrom, mTo, mCore in it, m
Garn Fm3,8743,929.655.6

Every formation top in 6406/3-8 →

Logs run across it

6 RUNS COVERING PART OF THE INTERVAL

  • VSPvertical seismic profile1,700 to 4,210 m
  • MWD LWD - NB GR RES DIR CAL DENmeasurement while drilling · logging while drilling · gamma ray · resistivity · directional survey · caliper · density2,312 to 4,216 m
  • MWD LWD - NEU SONICmeasurement while drilling · logging while drilling · neutron · sonic2,312 to 4,216 m
  • QUAD COMBO3,759 to 4,186 m
  • RCIreservoir characterization instrument3,842 to 4,182 m
  • RCI MINI-DST-VIT-SAMPLEreservoir characterization instrument · drill-stem test3,843 to 3,890 m

Logs, casing, and the files you can open →

Seeing the core itself

The core is held by the Norwegian Offshore Directorate in its Geobank, which has rooms for viewing and sampling by booking.

The Directorate's Geobank: viewing and sampling →

About this data

Norwegian Offshore Directorate (Sodir) FactPages, mirrored nightly and used under the Norwegian Licence for Open Government Data (NLOD). The Directorate files a core as an interval and nothing against it. Everything else on this page is on file for the wellbore and is shown here because its depth falls inside the core's interval: photographs by the interval in their title, thin sections and slides by their depth, tests and logs by overlap, units by this wellbore's own tops. Core depths are driller's depths, so a mark at the very edge can belong to the neighboring core. Reports are filed for the well, not for one core.

Developers: this page as JSON is GET /v1/data/norway/wells/6350/cores/2, documented in the API reference.