30/9-1
Exploration · Appraisal · P&A · Oil · Norsk Hydro Produksjon AS · Oseberg · PL 079
Core 6
Core 6 of 30/9-1 was cut from 2,750 to 2,768 m, 18 m in the Etive Fm. The Directorate lists core samples from it as available.
- 18
- m cored · 2,750 to 2,768
- 1
- test or fluid sample across it
- 9
- log runs across it
SODIR FACTPAGES · PLACED BY DEPTH IN THIS WELLBORE
Down the core
TOP OF THE CORE AT THE TOP · TAP A MARK FOR WHAT IT IS
What it was cut through
| Unit | From, m | To, m | Core in it, m |
|---|---|---|---|
| Etive Fm | 2,750 | 2,768 | 18 |
Tests and fluid samples across it
- DST 12,743 to 2,761 mOil 0 Sm³/d · gas 0 Sm³/d
Logs run across it
9 RUNS COVERING PART OF THE INTERVAL
- VELOCITYvelocity (check-shot) survey648 to 2,893 m
- DLL MSFL MLLdual laterolog · micro-spherically focused log · microlaterolog2,495 to 2,870 m
- HDT SHDThigh-resolution dipmeter · stratigraphic high-resolution dipmeter2,495 to 2,897 m
- ISF LSS MSFL EPTinduction spherically focused log · long-spaced sonic · micro-spherically focused log2,495 to 2,895 m
- ISF LSS NGTinduction spherically focused log · long-spaced sonic · natural gamma ray spectrometry2,495 to 2,897 m
- LDT CNL NGT EPTlitho-density tool · compensated neutron log · natural gamma ray spectrometry2,495 to 2,893 m
- CSTsidewall core sample taker2,505 to 2,895 m
- CSTsidewall core sample taker2,520 to 2,885 m
- RFTrepeat formation tester2,570 to 2,881 m
Seeing the core itself
The core is held by the Norwegian Offshore Directorate in its Geobank, which has rooms for viewing and sampling by booking.
About this data
Norwegian Offshore Directorate (Sodir) FactPages, mirrored nightly and used under the Norwegian Licence for Open Government Data (NLOD). The Directorate files a core as an interval and nothing against it. Everything else on this page is on file for the wellbore and is shown here because its depth falls inside the core's interval: photographs by the interval in their title, thin sections and slides by their depth, tests and logs by overlap, units by this wellbore's own tops. Core depths are driller's depths, so a mark at the very edge can belong to the neighboring core. Reports are filed for the well, not for one core.
Developers: this page as JSON is GET /v1/data/norway/wells/65/cores/6, documented in the API reference.