NORWAY · WELLBORES · NPDID 6507

25/6-4 S

Exploration · Wildcat · P&A · Dry · Det norske oljeselskap ASA · PL 414

1 document: reports, logs, and plots →

What was run in 25/6-4 S and how the hole was built: the logs with their intervals, the casing strings with leak-off tests, and the mud at depth.

The table below says which logs were run and over what interval. The curves themselves are held in Diskos, Norway's national data repository; its public portal lists what has been released for a wellbore and can be ordered for an administrative fee. Diskos public portal →

Logs

LogTop, mBase, m
MWD - DIRMWD measurement while drilling · DIR directional survey143202
MWD - DIR RES GR ECD SONMWD measurement while drilling · DIR directional survey · RES resistivity · GR gamma ray · ECD equivalent circulating density · SON sonic2022,009
MWD - DIR RES GR ECD SON NEU DENMWD measurement while drilling · DIR directional survey · RES resistivity · GR gamma ray · ECD equivalent circulating density · SON sonic · NEU neutron · DEN density2,0092,950

Casing and leak-off tests

CasingDiameter, inDepth, mHole, inHole depth, mLOT/FIT, g/cm³Test
Conductor30197362020LOT
Surf.cond.13 3/81,33717 1/21,3440LOT
Pilot hole—1,3449 7/81,3440LOT
Interm.9 5/82,00812 1/42,0090LOT
Open hole—2,9508 1/22,9500LOT

Drilling mud

11 READINGS · BY DEPTH

Depth, mWeight, g/cm³Viscosity, mPa·sYield point, PaType
1761.400spud mud
2021.0300Spud mud
2021.400spud mud
6021.0300Spud mud
8581.4900kill mud
1,3441.1980Kcl polymer kill mud
1,5531.34180Aquadrill wbm
2,0091.37210Aquadrill wbm
2,2651.24250Carbosea obm
2,9211.24180Carbosea obm
2,9501.24160Carbosea obm

The words under each tool string are Petrora's reading of the standard codes in it; a code we do not recognize is left as filed. No composite log has been released for this well, so there is no file to open beside these runs.

About this data

Norwegian Offshore Directorate (Sodir) FactPages, mirrored nightly and used under the Norwegian Licence for Open Government Data (NLOD). Log names are the Directorate's tool strings as filed; the plain-word readings beside them are Petrora's, from common industry abbreviations. Depths are metres along the wellbore from the kelly bushing; diameters are inches, as filed.

Developers: this page as JSON is GET /v1/data/norway/wells/6507, documented in the API reference.