NORWAY · WELLBORES · NPDID 6589

35/12-4 S

Exploration · Appraisal · P&A · Oil/gas · Wintershall Norge ASA · PL 378

1 document: reports, logs, and plots →

Core 2

Core 2 of 35/12-4 S was cut from 3,076 to 3,088 m, 12 m in the Ness Fm. The Directorate lists core samples from it as available.

12
m cored · 3,076 to 3,088
2
tests and fluid samples across it
8
log runs across it

SODIR FACTPAGES · PLACED BY DEPTH IN THIS WELLBORE

Down the core

TOP OF THE CORE AT THE TOP · TAP A MARK FOR WHAT IT IS

DEPTHFORMATIONCOREPHOTOSTHINSEC.SLIDESTESTS3,0763,088 m3,0783,0803,0823,0843,086Ness Fm, 3,076 to 3,088 mNess FmCore 2, 3,076 to 3,088 mCore 212 m

What it was cut through

UnitFrom, mTo, mCore in it, m
Ness Fm3,0763,08812

Every formation top in 35/12-4 S →

Tests and fluid samples across it

  • DST 13,082 to 3,127 mOil 1,010 Sm³/d · gas 90,243 Sm³/d
  • DST sample3,127 to 3,082 mOil · sample available: yes

Full test results for the well →

Logs run across it

8 RUNS COVERING PART OF THE INTERVAL

  • VSPvertical seismic profile505 to 3,315 m
  • SLAM2,366 to 3,315 m
  • SBTsegmented bond tool2,404 to 3,312 m
  • VSPvertical seismic profile2,404 to 3,585 m
  • LWD - RES ECD GR DIR CAL DEN NEUlogging while drilling · resistivity · equivalent circulating density · gamma ray · directional survey · caliper · density · neutron2,409 to 3,315 m
  • EARTH IMAGER2,500 to 3,225 m
  • RCIreservoir characterization instrument2,533 to 3,272 m
  • MREXmagnetic resonance explorer3,060 to 3,150 m

Logs, casing, and the files you can open →

Seeing the core itself

The core is held by the Norwegian Offshore Directorate in its Geobank, which has rooms for viewing and sampling by booking.

The Directorate's Geobank: viewing and sampling →

About this data

Norwegian Offshore Directorate (Sodir) FactPages, mirrored nightly and used under the Norwegian Licence for Open Government Data (NLOD). The Directorate files a core as an interval and nothing against it. Everything else on this page is on file for the wellbore and is shown here because its depth falls inside the core's interval: photographs by the interval in their title, thin sections and slides by their depth, tests and logs by overlap, units by this wellbore's own tops. Core depths are driller's depths, so a mark at the very edge can belong to the neighboring core. Reports are filed for the well, not for one core.

Developers: this page as JSON is GET /v1/data/norway/wells/6589/cores/2, documented in the API reference.