NORWAY · WELLBORES · NPDID 67

34/10-15

Exploration · Appraisal · P&A · Shows · Den norske stats oljeselskap a.s · Gullfaks · PL 050

12 documents: reports, logs, and plots →

Core 9

Core 9 of 34/10-15 was cut from 2,301 to 2,314.8 m, 13.8 m in the Statfjord Gp. The Directorate lists core samples from it as available.

13.8
m cored · 2,301 to 2,314.8
3
photographs
5
log runs across it

SODIR FACTPAGES · PLACED BY DEPTH IN THIS WELLBORE

Down the core

TOP OF THE CORE AT THE TOP · TAP A MARK FOR WHAT IT IS

DEPTHFORMATIONCOREPHOTOSTHINSEC.SLIDESTESTS2,3012,314.8 m2,3022,3042,3062,3082,3102,3122,314Statfjord Gp, 2,301 to 2,314.8 mStatfjord GpCore 9, 2,301 to 2,314.8 mCore 913.8 m2,301 to 2,307 m: 1 photo. Open.12,307 to 2,313 m: 1 photo. Open.12,313 to 2,314 m: 1 photo. Open.11.7 m not cored

Photographs of this core

3 PHOTOS · HOSTED BY THE NORWEGIAN OFFSHORE DIRECTORATE

What it was cut through

UnitFrom, mTo, mCore in it, m
Statfjord Gp2,3012,314.813.8

Every formation top in 34/10-15 →

Logs run across it

5 RUNS COVERING PART OF THE INTERVAL

  • ISF SON GR MSFLinduction spherically focused log · sonic · gamma ray · micro-spherically focused log249 to 2,400 m
  • VSPvertical seismic profile253 to 2,400 m
  • HDThigh-resolution dipmeter1,737 to 2,405 m
  • NGSnatural gamma ray spectrometry1,752 to 2,400 m
  • GEODIP1,865 to 2,404 m

Logs, casing, and the files you can open →

Core and petrography reports on file for the well

Seeing the core itself

The core is held by the Norwegian Offshore Directorate in its Geobank, which has rooms for viewing and sampling by booking.

The Directorate's Geobank: viewing and sampling →

About this data

Norwegian Offshore Directorate (Sodir) FactPages, mirrored nightly and used under the Norwegian Licence for Open Government Data (NLOD). The Directorate files a core as an interval and nothing against it. Everything else on this page is on file for the wellbore and is shown here because its depth falls inside the core's interval: photographs by the interval in their title, thin sections and slides by their depth, tests and logs by overlap, units by this wellbore's own tops. Core depths are driller's depths, so a mark at the very edge can belong to the neighboring core. Reports are filed for the well, not for one core.

Developers: this page as JSON is GET /v1/data/norway/wells/67/cores/9, documented in the API reference.