NORWAY · WELLBORES · NPDID 6755

8/10-4 B

Exploration · Appraisal · Junked · Not applicable · Centrica Resources (Norge) AS · Oda · PL 405

1 document: reports, logs, and plots →

What was run in 8/10-4 B and how the hole was built: the logs with their intervals, the casing strings with leak-off tests, and the mud at depth.

The table below says which logs were run and over what interval. The curves themselves are held in Diskos, Norway's national data repository; its public portal lists what has been released for a wellbore and can be ordered for an administrative fee. Diskos public portal →

Logs

LogTop, mBase, m
LWD - DIRLWD logging while drilling · DIR directional survey110226
LWD - DIR PWDLWD logging while drilling · DIR directional survey · PWD pressure while drilling2261,011
LWD - GR RES SON DIR PWDLWD logging while drilling · GR gamma ray · RES resistivity · SON sonic · DIR directional survey · PWD pressure while drilling2261,011
LWD - GR RES SON DIR PWDLWD logging while drilling · GR gamma ray · RES resistivity · SON sonic · DIR directional survey · PWD pressure while drilling1,0011,141

Casing and leak-off tests

CasingDiameter, inDepth, mHole, inHole depth, mLOT/FIT, g/cm³Test
Open hole—2,54912 1/42,5490LOT

Drilling mud

7 READINGS · BY DEPTH

Depth, mWeight, g/cm³Viscosity, mPa·sYield point, PaType
7201.51500Enviromul
8531.44260Enviromul
1,0531.44260Enviromul
1,2031.44270Enviromul
2,5011.44300Enviromul
2,5491.51500Enviromul
2,5491.51500Enviromul

The words under each tool string are Petrora's reading of the standard codes in it; a code we do not recognize is left as filed. No composite log has been released for this well, so there is no file to open beside these runs.

About this data

Norwegian Offshore Directorate (Sodir) FactPages, mirrored nightly and used under the Norwegian Licence for Open Government Data (NLOD). Log names are the Directorate's tool strings as filed; the plain-word readings beside them are Petrora's, from common industry abbreviations. Depths are metres along the wellbore from the kelly bushing; diameters are inches, as filed.

Developers: this page as JSON is GET /v1/data/norway/wells/6755, documented in the API reference.