NORWAY · WELLBORES · NPDID 7047
16/2-16
Exploration · Appraisal · P&A · Oil · Lundin Norway AS · Johan Sverdrup · PL 501
Core 2
Core 2 of 16/2-16 was cut from 1,967 to 1,986.8 m, 19.8 m in the Eiriksson Fm. The Directorate lists core samples from it as available.
- 19.8
- m cored · 1,967 to 1,986.8
- 7
- log runs across it
SODIR FACTPAGES · PLACED BY DEPTH IN THIS WELLBORE
Down the core
TOP OF THE CORE AT THE TOP · TAP A MARK FOR WHAT IT IS
The Directorate has no photographs, thin sections, core-derived slides, or tests on file inside this core's interval. The well's core reports, where there are any, are below.
What it was cut through
| Unit | From, m | To, m | Core in it, m |
|---|---|---|---|
| Eiriksson Fm | 1,967 | 1,986.8 | 19.8 |
Logs run across it
7 RUNS COVERING PART OF THE INTERVAL
- GR RES DEN NEU SON DIR PWDgamma ray · resistivity · density · neutron · sonic · directional survey · pressure while drilling687 to 2,213 m
- VSPvertical seismic profile1,237 to 2,204 m
- MSIP FMImodular sonic imaging platform (Sonic Scanner) · formation micro-imager1,872 to 2,210 m
- PEX HRLA HNGS ECSPlatform Express (resistivity, density, neutron) · high-resolution laterolog array · spectral gamma ray (hostile environment) · elemental capture spectroscopy1,873 to 2,207 m
- CMR XPTcombinable magnetic resonance · formation pressure tester (PressureXpress)1,890 to 2,201 m
- MSCTmechanical sidewall coring tool1,920 to 2,200 m
- MDTmodular formation dynamics tester1,951 to 1,968 m
Seeing the core itself
The core is held by the Norwegian Offshore Directorate in its Geobank, which has rooms for viewing and sampling by booking.
About this data
Norwegian Offshore Directorate (Sodir) FactPages, mirrored nightly and used under the Norwegian Licence for Open Government Data (NLOD). The Directorate files a core as an interval and nothing against it. Everything else on this page is on file for the wellbore and is shown here because its depth falls inside the core's interval: photographs by the interval in their title, thin sections and slides by their depth, tests and logs by overlap, units by this wellbore's own tops. Core depths are driller's depths, so a mark at the very edge can belong to the neighboring core. Reports are filed for the well, not for one core.
Developers: this page as JSON is GET /v1/data/norway/wells/7047/cores/2, documented in the API reference.