NORWAY · WELLBORES · NPDID 7207
6506/9-3
Exploration · Wildcat · P&A · Gas/condensate · Statoil Petroleum AS · Åsgard · PL 479
Core 2
Core 2 of 6506/9-3 was cut from 4,304 to 4,384.8 m, 80.8 m in the Ile Fm. The Directorate lists core samples from it as available.
- 80.8
- m cored · 4,304 to 4,384.8
- 1
- thin section in the interval
- 1
- test or fluid sample across it
- 8
- log runs across it
SODIR FACTPAGES · PLACED BY DEPTH IN THIS WELLBORE
Down the core
TOP OF THE CORE AT THE TOP · TAP A MARK FOR WHAT IT IS
What it was cut through
| Unit | From, m | To, m | Core in it, m |
|---|---|---|---|
| Ile Fm | 4,304 | 4,384.8 | 80.8 |
Thin sections in this interval
1 ON FILE
| Section | Depth | In |
|---|---|---|
| 3919 | 4,341.8 m | Ile Fm |
Tests and fluid samples across it
- MDT sample— to 4,305.7 mCondensate · sample available: yes
Logs run across it
8 RUNS COVERING PART OF THE INTERVAL
- VSPvertical seismic profile311 to 4,412 m
- AIT MSIP LDS APS GRarray induction tool · modular sonic imaging platform (Sonic Scanner) · litho-density sonde · accelerator porosity sonde · gamma ray3,700 to 4,696 m
- MWD - GVR ECO TELEmeasurement while drilling · geoVISION resistivity · EcoScope multifunction logging · TeleScope telemetry4,151 to 4,692 m
- CMR ECS HNGScombinable magnetic resonance · elemental capture spectroscopy · spectral gamma ray (hostile environment)4,153 to 4,690 m
- MDTmodular formation dynamics tester4,238 to 4,373 m
- MDTmodular formation dynamics tester4,250 to 4,628 m
- MDTmodular formation dynamics tester4,333 to 4,333 m
- MDT MINIDST VITmodular formation dynamics tester4,346 to 4,346 m
Seeing the core itself
The core is held by the Norwegian Offshore Directorate in its Geobank, which has rooms for viewing and sampling by booking.
About this data
Norwegian Offshore Directorate (Sodir) FactPages, mirrored nightly and used under the Norwegian Licence for Open Government Data (NLOD). The Directorate files a core as an interval and nothing against it. Everything else on this page is on file for the wellbore and is shown here because its depth falls inside the core's interval: photographs by the interval in their title, thin sections and slides by their depth, tests and logs by overlap, units by this wellbore's own tops. Core depths are driller's depths, so a mark at the very edge can belong to the neighboring core. Reports are filed for the well, not for one core.
Developers: this page as JSON is GET /v1/data/norway/wells/7207/cores/2, documented in the API reference.