NORWAY · WELLBORES · NPDID 7322
6406/12-3 S
Exploration · Wildcat · P&A · Oil/gas · VNG Norge AS · Fenja · PL 586
What was run in 6406/12-3 S and how the hole was built: the logs with their intervals, the casing strings with leak-off tests, and the mud at depth.
The table below says which logs were run and over what interval. The curves themselves are held in Diskos, Norway's national data repository; its public portal lists what has been released for a wellbore and can be ordered for an administrative fee. Diskos public portal →
Logs
| Log | Top, m | Base, m |
|---|---|---|
| LWD - GR RES PWD DIRLWD logging while drilling · GR gamma ray · RES resistivity · PWD pressure while drilling · DIR directional survey | 1 | 418 |
| SLAM | 348 | 3,820 |
| VSPVSP vertical seismic profile | 1,155 | 3,990 |
| LWD - GR RES PWD DEN POR SONLWD logging while drilling · GR gamma ray · RES resistivity · PWD pressure while drilling · DEN density · POR porosity · SON sonic | 2,260 | 3,450 |
| SBTSBT segmented bond tool | 3,296 | 3,425 |
| LWD - GR RES DEN PWD DIR NPOR SOLWD logging while drilling · GR gamma ray · RES resistivity · DEN density · PWD pressure while drilling · DIR directional survey | 3,450 | 3,839 |
| SWCSWC sidewall cores | 3,486 | 3,507 |
| MREXMREX magnetic resonance explorer | 3,500 | 3,820 |
| PS | 3,517 | 3,777 |
| MREXMREX magnetic resonance explorer | 3,838 | 3,965 |
| SLAM | 3,838 | 3,900 |
| LWD - GR RES PWD DIR TTLWD logging while drilling · GR gamma ray · RES resistivity · PWD pressure while drilling · DIR directional survey | 3,839 | 4,001 |
| PS | 3,841 | 3,900 |
Casing and leak-off tests
| Casing | Diameter, in | Depth, m | Hole, in | Hole depth, m | LOT/FIT, g/cm³ | Test |
|---|---|---|---|---|---|---|
| Conductor | 30 | 414.7 | 36 | 418 | 0 | — |
| Surf.cond. | 20 | 1,238.6 | 26 | 1,246 | 1.7 | FIT |
| Interm. | 13 3/8 | 2,265.2 | 17 1/2 | 2,271 | 1.87 | FIT |
| Prod. | 9 5/8 | 3,442.4 | 12 1/4 | 3,450 | 1.98 | LOT |
| Liner | 7 | 3,838 | 8 1/2 | 3,839 | 0 | — |
| Open hole | — | 4,001 | 6 | 4,001 | 0 | — |
Drilling mud
29 READINGS · BY DEPTH
| Depth, m | Weight, g/cm³ | Viscosity, mPa·s | Yield point, Pa | Type |
|---|---|---|---|---|
| 418 | 1.34 | 14 | 0 | Kcl polymer displacement mud |
| 454 | 1.05 | 18 | 0 | High viscosity bentonite mud |
| 460 | 1.34 | 14 | 0 | Kcl polymer displacement mud |
| 484 | 1.05 | 18 | 0 | High viscosity bentonite mud |
| 916 | 1.34 | 14 | 0 | Kcl polymer displacement mud |
| 964 | 1.05 | 18 | 0 | High viscosity bentonite mud |
| 980 | 1.34 | 14 | 0 | Kcl polymer displacement mud |
| 985 | 1.63 | 53 | 0 | Yellow xp-07 |
| 1,050 | 1.05 | 18 | 0 | High viscosity bentonite mud |
| 1,180 | 1.49 | 30 | 0 | Yellow xp-07 |
| 1,246 | 1.46 | 29 | 0 | Yellow xp-07 low ecd |
| 1,246 | 1.02 | 0 | 0 | Kcl polymer displacement mud |
| 1,246 | 1.46 | 29 | 0 | Yellow xp-07 low ecd |
| 1,252 | 1.49 | 18 | 0 | Yellow xp-07 |
| 1,280 | 1.63 | 53 | 0 | Yellow xp-07 |
| 2,195 | 1.61 | 40 | 0 | Yellow xp-07 low ecd |
| 2,379 | 1.61 | 42 | 0 | Xp o71.62 |
| 3,176 | 1.65 | 39 | 0 | Yellow xp-07 |
| 3,233 | 1.65 | 40 | 0 | Yellow xp-07 low ecd |
| 3,450 | 1.73 | 45 | 0 | Xp o7 |
| 3,450 | 1.65 | 36 | 0 | Yellow xp-07 low ecd |
| 3,506 | 1.73 | 41 | 0 | Yellow xp-07 low ecd |
| 3,632 | 1.73 | 40 | 0 | Xp o7 |
| 3,738 | 1.65 | 36 | 0 | Yellow xp-07 |
| 3,738 | 1.34 | 0 | 0 | Cabr brine |
| 3,765 | 1.73 | 41 | 0 | Xp-07 |
| 3,839 | 1.61 | 27 | 0 | Yellow xp-07 low ecd |
| 3,839 | 1.73 | 41 | 0 | Yellow xp-07 low ecd |
| 4,001 | 1.61 | 30 | 0 | Yellow xp-07 |
The words under each tool string are Petrora's reading of the standard codes in it; a code we do not recognize is left as filed. No composite log has been released for this well, so there is no file to open beside these runs.
About this data
Norwegian Offshore Directorate (Sodir) FactPages, mirrored nightly and used under the Norwegian Licence for Open Government Data (NLOD). Log names are the Directorate's tool strings as filed; the plain-word readings beside them are Petrora's, from common industry abbreviations. Depths are metres along the wellbore from the kelly bushing; diameters are inches, as filed.
Developers: this page as JSON is GET /v1/data/norway/wells/7322, documented in the API reference.