NORWAY · WELLBORES · NPDID 7388

25/8-18 S

Exploration · Appraisal · P&A · Oil · Statoil Petroleum AS · Breidablikk · PL 169

1 document: reports, logs, and plots →

Core 2

Core 2 of 25/8-18 S was cut from 1,765 to 1,792.1 m, 27.1 m in the Heimdal Fm. The Directorate lists core samples from it as available.

27.1
m cored · 1,765 to 1,792.1
1
palynology slide made from core
4
log runs across it

SODIR FACTPAGES · PLACED BY DEPTH IN THIS WELLBORE

Down the core

TOP OF THE CORE AT THE TOP · TAP A MARK FOR WHAT IT IS

DEPTHFORMATIONCOREPHOTOSTHINSEC.SLIDESTESTS1,7651,792.1 m1,7701,7751,7801,7851,790Heimdal Fm, 1,765 to 1,792.1 mHeimdal FmCore 2, 1,765 to 1,792.1 mCore 227.1 m

What it was cut through

UnitFrom, mTo, mCore in it, m
Heimdal Fm1,7651,792.127.1

Every formation top in 25/8-18 S →

Palynology slides made from core

1 IN THE INTERVAL

DepthLab codeIn
1,767.3 mROBERTHeimdal Fm

Logs run across it

4 RUNS COVERING PART OF THE INTERVAL

  • ZOVSPzero-offset vertical seismic profile100 to 1,884 m
  • AIT PPC SS PEXarray induction tool · powered positioning caliper · Platform Express (resistivity, density, neutron)1,155 to 1,884 m
  • MDTmodular formation dynamics tester1,706 to 1,796 m
  • MWD - ARCVRES9 TELEmeasurement while drilling · arcVISION array resistivity · TeleScope telemetry1,730 to 1,890 m

Logs, casing, and the files you can open →

Seeing the core itself

The core is held by the Norwegian Offshore Directorate in its Geobank, which has rooms for viewing and sampling by booking.

The Directorate's Geobank: viewing and sampling →

About this data

Norwegian Offshore Directorate (Sodir) FactPages, mirrored nightly and used under the Norwegian Licence for Open Government Data (NLOD). The Directorate files a core as an interval and nothing against it. Everything else on this page is on file for the wellbore and is shown here because its depth falls inside the core's interval: photographs by the interval in their title, thin sections and slides by their depth, tests and logs by overlap, units by this wellbore's own tops. Core depths are driller's depths, so a mark at the very edge can belong to the neighboring core. Reports are filed for the well, not for one core.

Developers: this page as JSON is GET /v1/data/norway/wells/7388/cores/2, documented in the API reference.