NORWAY · WELLBORES · NPDID 7464

6406/12-3 B

Exploration · Appraisal · P&A · Oil/gas · VNG Norge AS · Fenja · PL 586

1 document: reports, logs, and plots →

What was run in 6406/12-3 B and how the hole was built: the logs with their intervals, the casing strings with leak-off tests, and the mud at depth.

The table below says which logs were run and over what interval. The curves themselves are held in Diskos, Norway's national data repository; its public portal lists what has been released for a wellbore and can be ordered for an administrative fee. Diskos public portal →

Logs

LogTop, mBase, m
MWD - GR RES AP DIRMWD measurement while drilling · GR gamma ray · RES resistivity · DIR directional survey2,3553,700
DS MR FLEX3,4503,839
GX UX IM3,4503,839
PCOR3,4503,839
RCX3,4503,839
SBL3,4503,839
SLAM DS CNL CZD AAC DILCNL compensated neutron log · DIL dual induction log3,4503,839
VSPVSP vertical seismic profile3,4503,839
MWD - GR RES NEU DEN SON APMWD measurement while drilling · GR gamma ray · RES resistivity · NEU neutron · DEN density · SON sonic3,7004,315

Casing and leak-off tests

CasingDiameter, inDepth, mHole, inHole depth, mLOT/FIT, g/cm³Test
Conductor30414.7364180—
Surf.cond.201,238.6261,2461.7FIT
Interm.13 3/82,347.817 1/22,3550—
Prod.9 5/83,692.512 1/43,7000—
Open hole—4,3158 1/24,3151.85FIT

Drilling mud

9 READINGS · BY DEPTH

Depth, mWeight, g/cm³Viscosity, mPa·sYield point, PaType
2,3301.61540Xp-07
2,5001.6400Xp-07
3,1211.61430Xp o7
3,6541.63400Xp o7
3,8141.61460Xp o7
3,9401.58370Xp o7
4,0501.56330Xp o7
4,1091.54370Xp o7
4,3151.54350Xp-07

The words under each tool string are Petrora's reading of the standard codes in it; a code we do not recognize is left as filed. No composite log has been released for this well, so there is no file to open beside these runs.

About this data

Norwegian Offshore Directorate (Sodir) FactPages, mirrored nightly and used under the Norwegian Licence for Open Government Data (NLOD). Log names are the Directorate's tool strings as filed; the plain-word readings beside them are Petrora's, from common industry abbreviations. Depths are metres along the wellbore from the kelly bushing; diameters are inches, as filed.

Developers: this page as JSON is GET /v1/data/norway/wells/7464, documented in the API reference.