NORWAY · WELLBORES · NPDID 7530

16/1-21 A

Exploration · Appraisal · P&A · Oil · Det norske oljeselskap ASA · Ivar Aasen · PL 001 B

1 document: reports, logs, and plots →

Core 2

Core 2 of 16/1-21 A was cut from 3,201 to 3,218.6 m, 17.6 m in the Skagerrak Fm. The Directorate lists core samples from it as available.

17.6
m cored · 3,201 to 3,218.6
5
log runs across it

SODIR FACTPAGES · PLACED BY DEPTH IN THIS WELLBORE

Down the core

TOP OF THE CORE AT THE TOP · TAP A MARK FOR WHAT IT IS

DEPTHFORMATIONCOREPHOTOSTHINSEC.SLIDESTESTS3,2013,218.6 m3,2053,2103,215Skagerrak Fm, 3,201 to 3,218.6 mSkagerrak FmCore 2, 3,201 to 3,218.6 mCore 217.6 m

The Directorate has no photographs, thin sections, core-derived slides, or tests on file inside this core's interval. The well's core reports, where there are any, are below.

What it was cut through

UnitFrom, mTo, mCore in it, m
Skagerrak Fm3,2013,218.617.6

Every formation top in 16/1-21 A →

Logs run across it

5 RUNS COVERING PART OF THE INTERVAL

  • ZAIT NMH IS AH NEXT PEX HNGSPlatform Express (resistivity, density, neutron) · spectral gamma ray (hostile environment)2,965 to 3,302 m
  • MRX XPT GRformation pressure tester (PressureXpress) · gamma ray3,070 to 3,300 m
  • MDT HCmodular formation dynamics tester3,119 to 3,221 m
  • LWD - GR RES DI PWD NEU DENlogging while drilling · gamma ray · resistivity · pressure while drilling · neutron · density3,133 to 3,313 m
  • PPC SS EMM GR UTpowered positioning caliper · gamma ray3,311 to 1,656 m

Logs, casing, and the files you can open →

Seeing the core itself

The core is held by the Norwegian Offshore Directorate in its Geobank, which has rooms for viewing and sampling by booking.

The Directorate's Geobank: viewing and sampling →

About this data

Norwegian Offshore Directorate (Sodir) FactPages, mirrored nightly and used under the Norwegian Licence for Open Government Data (NLOD). The Directorate files a core as an interval and nothing against it. Everything else on this page is on file for the wellbore and is shown here because its depth falls inside the core's interval: photographs by the interval in their title, thin sections and slides by their depth, tests and logs by overlap, units by this wellbore's own tops. Core depths are driller's depths, so a mark at the very edge can belong to the neighboring core. Reports are filed for the well, not for one core.

Developers: this page as JSON is GET /v1/data/norway/wells/7530/cores/2, documented in the API reference.