NORWAY · WELLBORES · NPDID 7532

16/1-23 S

Exploration · Appraisal · P&A · Oil · Lundin Norway AS · Edvard Grieg · PL 338

1 document: reports, logs, and plots →

Core 1

Core 1 of 16/1-23 S was cut from 1,681 to 1,690.4 m, 9.4 m in the Grid Fm. The Directorate lists core samples from it as available.

9.4
m cored · 1,681 to 1,690.4
4
log runs across it

SODIR FACTPAGES · PLACED BY DEPTH IN THIS WELLBORE

Down the core

TOP OF THE CORE AT THE TOP · TAP A MARK FOR WHAT IT IS

DEPTHFORMATIONCOREPHOTOSTHINSEC.SLIDESTESTS1,6811,690.4 m1,6821,6841,6861,688Grid Fm, 1,681 to 1,690.4 mGrid FmCore 1, 1,681 to 1,690.4 mCore 19.4 m255.1 m not cored

The Directorate has no photographs, thin sections, core-derived slides, or tests on file inside this core's interval. The well's core reports, where there are any, are below.

What it was cut through

UnitFrom, mTo, mCore in it, m
Grid Fm1,6811,690.49.4

Every formation top in 16/1-23 S →

Logs run across it

4 RUNS COVERING PART OF THE INTERVAL

  • DSL CN ZDL XMAC RTEX MLLdigital spectral gamma ray · compensated neutron · compensated Z-densilog · cross-multipole array acoustic · microlaterolog200 to 2,129 m
  • DSL VSPdigital spectral gamma ray · vertical seismic profile200 to 2,128 m
  • MWD - GR RES ECD DIR CAL NEU NEUmeasurement while drilling · gamma ray · resistivity · equivalent circulating density · directional survey · caliper · neutron633 to 1,888 m
  • DSL SBTdigital spectral gamma ray · segmented bond tool1,500 to 1,992 m

Logs, casing, and the files you can open →

Seeing the core itself

The core is held by the Norwegian Offshore Directorate in its Geobank, which has rooms for viewing and sampling by booking.

The Directorate's Geobank: viewing and sampling →

About this data

Norwegian Offshore Directorate (Sodir) FactPages, mirrored nightly and used under the Norwegian Licence for Open Government Data (NLOD). The Directorate files a core as an interval and nothing against it. Everything else on this page is on file for the wellbore and is shown here because its depth falls inside the core's interval: photographs by the interval in their title, thin sections and slides by their depth, tests and logs by overlap, units by this wellbore's own tops. Core depths are driller's depths, so a mark at the very edge can belong to the neighboring core. Reports are filed for the well, not for one core.

Developers: this page as JSON is GET /v1/data/norway/wells/7532/cores/1, documented in the API reference.