NORWAY · WELLBORES · NPDID 7550
6707/10-3 S
Exploration · Wildcat · P&A · Gas · Centrica Resources (Norge) AS · PL 528 B
What was run in 6707/10-3 S and how the hole was built: the logs with their intervals, the casing strings with leak-off tests, and the mud at depth.
The table below says which logs were run and over what interval. The curves themselves are held in Diskos, Norway's national data repository; its public portal lists what has been released for a wellbore and can be ordered for an administrative fee. Diskos public portal →
Logs
| Log | Top, m | Base, m |
|---|---|---|
| LWD - GR APWD RES DILWD logging while drilling · GR gamma ray · APWD annular pressure while drilling · RES resistivity | 1,503 | 2,197 |
| VIVSP | 2,113 | 4,780 |
| LWD - GR AWPD DEN RES POR DI SONLWD logging while drilling · GR gamma ray · DEN density · RES resistivity · POR porosity · SON sonic | 2,197 | 3,225 |
| PEX AIT HNGSPEX Platform Express (resistivity, density, neutron) · AIT array induction tool · HNGS spectral gamma ray (hostile environment) | 3,185 | 3,605 |
| PPC MSIPPPC powered positioning caliper · MSIP modular sonic imaging platform (Sonic Scanner) | 3,185 | 3,661 |
| LWD - GR APWD CAL DEN RES FPT SOLWD logging while drilling · GR gamma ray · APWD annular pressure while drilling · CAL caliper · DEN density · RES resistivity | 3,225 | 4,300 |
| PEX AIT HNGSPEX Platform Express (resistivity, density, neutron) · AIT array induction tool · HNGS spectral gamma ray (hostile environment) | 3,300 | 4,387 |
| MDTMDT modular formation dynamics tester | 3,323 | 3,550 |
| LWD - GR APWD DEN RES POR DI FPTLWD logging while drilling · GR gamma ray · APWD annular pressure while drilling · DEN density · RES resistivity · POR porosity | 4,300 | 4,398 |
| MDTMDT modular formation dynamics tester | 4,322 | 4,348 |
| LWD - GR APWD DEN RES POR SON DILWD logging while drilling · GR gamma ray · APWD annular pressure while drilling · DEN density · RES resistivity · POR porosity · SON sonic | 4,398 | 4,789 |
Casing and leak-off tests
| Casing | Diameter, in | Depth, m | Hole, in | Hole depth, m | LOT/FIT, g/cm³ | Test |
|---|---|---|---|---|---|---|
| Conductor | 30 | 1,503 | 36 | 1,503 | 0 | — |
| Interm. | 13 3/8 | 2,192 | 17 1/2 | 2,197 | 1.36 | LOT |
| Interm. | 10 3/4 | 3,220 | 12 1/4 | 3,225 | 1.72 | FIT |
| Liner | 7 5/8 | 4,300 | 9 1/2 | 4,300 | 1.65 | FIT |
| Open hole | — | 4,789 | 6 1/2 | 4,789 | 0 | — |
Drilling mud
10 READINGS · BY DEPTH
| Depth, m | Weight, g/cm³ | Viscosity, mPa·s | Yield point, Pa | Type |
|---|---|---|---|---|
| 1,625 | 1.25 | 0 | 0 | Seawater |
| 1,900 | 1.25 | 0 | 0 | Seawater |
| 2,232 | 1.15 | 0 | 0 | Obm |
| 3,208 | 1.2 | 0 | 0 | Obm |
| 3,652 | 1.24 | 0 | 0 | Obm |
| 3,910 | 1.26 | 0 | 0 | Obm |
| 4,305 | 1.31 | 0 | 0 | Obm |
| 4,370 | 1.35 | 0 | 0 | Obm |
| 4,400 | 1.4 | 0 | 0 | Obm |
| 4,712 | 1.4 | 0 | 0 | Obm |
The words under each tool string are Petrora's reading of the standard codes in it; a code we do not recognize is left as filed. No composite log has been released for this well, so there is no file to open beside these runs.
About this data
Norwegian Offshore Directorate (Sodir) FactPages, mirrored nightly and used under the Norwegian Licence for Open Government Data (NLOD). Log names are the Directorate's tool strings as filed; the plain-word readings beside them are Petrora's, from common industry abbreviations. Depths are metres along the wellbore from the kelly bushing; diameters are inches, as filed.
Developers: this page as JSON is GET /v1/data/norway/wells/7550, documented in the API reference.