NORWAY · WELLBORES · NPDID 7579
6305/8-2
Exploration · Appraisal · P&A · Gas · A/S Norske Shell · Ormen Lange · PL 250
Core 4
Core 4 of 6305/8-2 was cut from 2,978 to 3,005.8 m, 27.8 m in the Egga Fm (informal) and Rogaland Gp. The Directorate lists core samples from it as available.
- 27.8
- m cored · 2,978 to 3,005.8
- 6
- log runs across it
SODIR FACTPAGES · PLACED BY DEPTH IN THIS WELLBORE
Down the core
TOP OF THE CORE AT THE TOP · TAP A MARK FOR WHAT IT IS
The Directorate has no photographs, thin sections, core-derived slides, or tests on file inside this core's interval. The well's core reports, where there are any, are below.
What it was cut through
| Unit | From, m | To, m | Core in it, m |
|---|---|---|---|
| Egga Fm (informal) | 2,978 | 3,005.4 | 27.4 |
| Rogaland Gp | 3,005.4 | 3,005.8 | 0.4 |
Logs run across it
6 RUNS COVERING PART OF THE INTERVAL
- MIC RES SON CBL VDLresistivity · sonic · cement bond log · variable density log2,576 to 3,081 m
- VSP GRvertical seismic profile · gamma ray2,711 to 3,062 m
- GR RES DEN NMR SPEC GRgamma ray · resistivity · density2,830 to 3,080 m
- MWD - PWD DImeasurement while drilling · pressure while drilling2,889 to 3,077 m
- MWD - GR RES PWD SON NEU DEN DImeasurement while drilling · gamma ray · resistivity · pressure while drilling · sonic · neutron · density2,896 to 3,068 m
- MDT MFRACmodular formation dynamics tester2,904 to 3,046 m
Seeing the core itself
The core is held by the Norwegian Offshore Directorate in its Geobank, which has rooms for viewing and sampling by booking.
About this data
Norwegian Offshore Directorate (Sodir) FactPages, mirrored nightly and used under the Norwegian Licence for Open Government Data (NLOD). The Directorate files a core as an interval and nothing against it. Everything else on this page is on file for the wellbore and is shown here because its depth falls inside the core's interval: photographs by the interval in their title, thin sections and slides by their depth, tests and logs by overlap, units by this wellbore's own tops. Core depths are driller's depths, so a mark at the very edge can belong to the neighboring core. Reports are filed for the well, not for one core.
Developers: this page as JSON is GET /v1/data/norway/wells/7579/cores/4, documented in the API reference.