NORWAY · WELLBORES · NPDID 7587

34/6-3 A

Exploration · Wildcat · P&A · Oil · Total E&P Norge AS · PL 554

1 document: reports, logs, and plots →

34/6-3 A is a wildcat exploration wellbore in the North Sea, drilled by Total E&P Norge AS, entered Sep 25, 2014, to 4,019 m in the Statfjord Gp.

Discovery 34/6-3 A (Akkar) · On the map →

4,019
m total depth · 3,749.3 m vertical
380.5
m water depth
Sep 25, 2014
entered · completed Nov 1, 2014
Statfjord Gp
at total depth · Early Jurassic
—
m of core
—
°C bottom-hole temperature

SODIR FACTPAGES · RECORD UPDATED FEB 20, 2026 · RELEASED NOV 1, 2016

On file for this wellbore

What the Directorate holds from this wellbore. Each opens the section that lists it.

Drilling

Drilling facility
LEIV EIRIKSSON · Semisub steel
Drilling days
34
Kelly bushing elevation
25 m
Maximum inclination
43.40000153°
Drilling permit
1546-L
Licensing round
TFO2009
Plugged and abandoned
Nov 1, 2014
Core samples available
Yes
Cuttings samples available
Yes
Position · ED50
61.57487° N, 2.73019° E
Hydrocarbons in
Cook Fm · Early Jurassic

Well history

WRITTEN BY THE NORWEGIAN OFFSHORE DIRECTORATE

General

The 34/6­3 A Akkar well is a geological sidetrack of 34/6­3 S, which confirmed oil in the Cook Formation in the Garantiana structure. The well is located in the Visund are of the North Sea. The primary objective of well 34/6-3 A was to test the hydrocarbon potential in the Akkar prospect, a separate structure located to the west of the Garantiana structure. The primary target was the Statfjord Group. The Cook Formation was secondary target. In 2002 well 34/6-1 S tested the Akkar structure further to the west than 34/6-3 A and found it water wet.

Operations and results

Wildcat well 34/6-3 A was kicked off from the 34/6­3 S well below the 13 3/8" casing shoes at 2049 m on 25 September 2014. It was drilled with the semi-submersible installation Leiv Eiriksson to TD at 4019 m (3749 m TVD) m in the Early Jurassic Statfjord Group. The well was drilled S-shaped: vertical down to ca 2100 m, deviated with a sail angle of ca 42 ° down to ca 3400 m, and then vertical again to TD. No significant problem was encountered in the operations. The well was drilled with NABM oil based mud from kick-off to 3510 m, and with WARP oil based mud from 351 m to TD.

Well 34/6­3 A penetrated top Cook Formation at 3603 m (3336 m TVD). The Cook Formation was oil bearing with the Oil­Water­Contact defined at 3650 m (3381.5 m TVD). Cook sandstones below the OWC, from 3675 m down to top Burton Formation at 3717 m (3447 m TVD) had good oil shows. The pressure points acquired in the water leg of the Cook Formation align with the gradient from 34/6­1 S. The Statfjord Group proved to be water bearing without shows.

No cores were cut in 34/6-3 A. MDT fluid samples were taken at 3628.62 m (oil), 3683.69 m (water w

Around this wellbore

This wellbore on Sodir FactPages → · Press release →

About this data

Norwegian Offshore Directorate (Sodir) FactPages, mirrored nightly and used under the Norwegian Licence for Open Government Data (NLOD). Depths are metres along the wellbore from the kelly bushing unless a row gives its own unit; older cores are filed in feet. A zero the Directorate files for an unmeasured pressure, density, or temperature is shown as a dash.

Developers: this page as JSON is GET /v1/data/norway/wells/7587, documented in the API reference.