NORWAY · WELLBORES · NPDID 76

6407/2-1

Exploration · Wildcat · P&A · Shows · Saga Petroleum ASA · PL 074

13 documents: reports, logs, and plots →

Core 5

Core 5 of 6407/2-1 was cut from 3,478 to 3,479.6 m, 1.6 m in the Åre Fm. The Directorate lists core samples from it as available.

1.6
m cored · 3,478 to 3,479.6
1
photograph
6
log runs across it

SODIR FACTPAGES · PLACED BY DEPTH IN THIS WELLBORE

Down the core

TOP OF THE CORE AT THE TOP · TAP A MARK FOR WHAT IT IS

DEPTHFORMATIONCOREPHOTOSTHINSEC.SLIDESTESTS3,4783,479.6 mÅre Fm, 3,478 to 3,479.6 mÅre FmCore 5, 3,478 to 3,479.6 mCore 51.6 m3,478 to 3,479 m: 1 photo. Open.1

Photographs of this core

1 PHOTO · HOSTED BY THE NORWEGIAN OFFSHORE DIRECTORATE

What it was cut through

UnitFrom, mTo, mCore in it, m
Åre Fm3,4783,479.61.6

Every formation top in 6407/2-1 →

Logs run across it

6 RUNS COVERING PART OF THE INTERVAL

  • VSP WSTvertical seismic profile · well seismic tool408 to 3,869 m
  • DIPMETER2,717 to 3,869 m
  • ISF LSS MSFL GRinduction spherically focused log · long-spaced sonic · micro-spherically focused log · gamma ray2,717 to 3,869 m
  • LDL CNL GRlitho-density log · compensated neutron log · gamma ray2,717 to 3,869 m
  • CSTsidewall core sample taker2,730 to 3,870 m
  • RFTrepeat formation tester2,947 to 3,774 m

Logs, casing, and the files you can open →

Seeing the core itself

The core is held by the Norwegian Offshore Directorate in its Geobank, which has rooms for viewing and sampling by booking.

The Directorate's Geobank: viewing and sampling →

About this data

Norwegian Offshore Directorate (Sodir) FactPages, mirrored nightly and used under the Norwegian Licence for Open Government Data (NLOD). The Directorate files a core as an interval and nothing against it. Everything else on this page is on file for the wellbore and is shown here because its depth falls inside the core's interval: photographs by the interval in their title, thin sections and slides by their depth, tests and logs by overlap, units by this wellbore's own tops. Core depths are driller's depths, so a mark at the very edge can belong to the neighboring core. Reports are filed for the well, not for one core.

Developers: this page as JSON is GET /v1/data/norway/wells/76/cores/5, documented in the API reference.