NORWAY · WELLBORES · NPDID 7618

6406/2-8

Exploration · Wildcat · P&A · Oil · Wintershall Norge AS · PL 589

1 document: reports, logs, and plots →

Core 1

Core 1 of 6406/2-8 was cut from 4,340 to 4,357.9 m, 17.9 m in the Åre Fm. The Directorate lists core samples from it as available.

17.9
m cored · 4,340 to 4,357.9
1
test or fluid sample across it
7
log runs across it

SODIR FACTPAGES · PLACED BY DEPTH IN THIS WELLBORE

Down the core

TOP OF THE CORE AT THE TOP · TAP A MARK FOR WHAT IT IS

DEPTHFORMATIONCOREPHOTOSTHINSEC.SLIDESTESTS4,3404,357.9 m4,3454,3504,355Åre Fm, 4,340 to 4,357.9 mÅre FmCore 1, 4,340 to 4,357.9 mCore 117.9 m

What it was cut through

UnitFrom, mTo, mCore in it, m
Åre Fm4,3404,357.917.9

Every formation top in 6406/2-8 →

Tests and fluid samples across it

  • DST sample4,345 to — mOil · sample available: yes

Full test results for the well →

Logs run across it

7 RUNS COVERING PART OF THE INTERVAL

  • GR DIgamma ray200 to 4,670 m
  • VSPvertical seismic profile1,158 to 4,668 m
  • SL MRspectral gamma ray4,050 to 4,679 m
  • SLAM ACI4,200 to 4,670 m
  • FMP FMSformation microscanner4,309 to 4,653 m
  • SWCsidewall cores4,309 to 4,440 m
  • LWD-DIR GR RES ND PWDlogging while drilling · directional survey · gamma ray · resistivity · pressure while drilling4,357 to 4,680 m

Logs, casing, and the files you can open →

Seeing the core itself

The core is held by the Norwegian Offshore Directorate in its Geobank, which has rooms for viewing and sampling by booking.

The Directorate's Geobank: viewing and sampling →

About this data

Norwegian Offshore Directorate (Sodir) FactPages, mirrored nightly and used under the Norwegian Licence for Open Government Data (NLOD). The Directorate files a core as an interval and nothing against it. Everything else on this page is on file for the wellbore and is shown here because its depth falls inside the core's interval: photographs by the interval in their title, thin sections and slides by their depth, tests and logs by overlap, units by this wellbore's own tops. Core depths are driller's depths, so a mark at the very edge can belong to the neighboring core. Reports are filed for the well, not for one core.

Developers: this page as JSON is GET /v1/data/norway/wells/7618/cores/1, documented in the API reference.