NORWAY · WELLBORES · NPDID 7619

6406/6-4

Exploration · Wildcat · Junked · Not applicable · Maersk Oil Norway AS · PL 510

1 document: reports, logs, and plots →

What was run in 6406/6-4 and how the hole was built: the logs with their intervals, the casing strings with leak-off tests, and the mud at depth.

The table below says which logs were run and over what interval. The curves themselves are held in Diskos, Norway's national data repository; its public portal lists what has been released for a wellbore and can be ordered for an administrative fee. Diskos public portal →

Logs

LogTop, mBase, m
MWD-DIMWD measurement while drilling286378
MWD-GR RES PWD DIMWD measurement while drilling · GR gamma ray · RES resistivity · PWD pressure while drilling2861,365
MWD-GR RES PWD DIMWD measurement while drilling · GR gamma ray · RES resistivity · PWD pressure while drilling3531,339
MWD-GR RES PWD DI SONMWD measurement while drilling · GR gamma ray · RES resistivity · PWD pressure while drilling · SON sonic1,3391,930

Casing and leak-off tests

CasingDiameter, inDepth, mHole, inHole depth, mLOT/FIT, g/cm³Test
Conductor36373423780—
Surf.cond.201,359261,3641.85LOT
Pilot hole—1,3659 7/81,3650—
Liner161,912201,9550—

Drilling mud

8 READINGS · BY DEPTH

Depth, mWeight, g/cm³Viscosity, mPa·sYield point, PaType
3401.0300Water based mud
1,2701.0300Water based mud
1,3471.3900Water based mud
1,7481.400Water based mud
1,8381.4600Water based mud
1,9111.5500Water based mud
1,9331.5400Water based mud
1,9551.5500Water based mud

The words under each tool string are Petrora's reading of the standard codes in it; a code we do not recognize is left as filed. No composite log has been released for this well, so there is no file to open beside these runs.

About this data

Norwegian Offshore Directorate (Sodir) FactPages, mirrored nightly and used under the Norwegian Licence for Open Government Data (NLOD). Log names are the Directorate's tool strings as filed; the plain-word readings beside them are Petrora's, from common industry abbreviations. Depths are metres along the wellbore from the kelly bushing; diameters are inches, as filed.

Developers: this page as JSON is GET /v1/data/norway/wells/7619, documented in the API reference.