NORWAY · WELLBORES · NPDID 7638

7220/11-2

Exploration · Appraisal · P&A · Gas · Lundin Norway AS · PL 609

1 document: reports, logs, and plots →

Core 2

Core 2 of 7220/11-2 was cut from 1,884.7 to 1,912.5 m, 27.9 m. The Directorate lists core samples from it as available.

27.9
m cored · 1,884.7 to 1,912.5
6
log runs across it

SODIR FACTPAGES · PLACED BY DEPTH IN THIS WELLBORE

Down the core

TOP OF THE CORE AT THE TOP · TAP A MARK FOR WHAT IT IS

DEPTHFORMATIONCOREPHOTOSTHINSEC.SLIDESTESTS1,884.71,912.5 m1,8901,8951,9001,9051,910Core 2, 1,884.7 to 1,912.5 mCore 227.9 m

The Directorate has no photographs, thin sections, core-derived slides, or tests on file inside this core's interval. The well's core reports, where there are any, are below.

Logs run across it

6 RUNS COVERING PART OF THE INTERVAL

  • VSPvertical seismic profile445 to 2,040 m
  • MWD-BR REMP BHPR MEC DEN NEU AACmeasurement while drilling · density · neutron1,175 to 2,050 m
  • FMI MSIPformation micro-imager · modular sonic imaging platform (Sonic Scanner)1,760 to 2,046 m
  • UBI PEX HRLA NEXTultrasonic borehole imager · Platform Express (resistivity, density, neutron) · high-resolution laterolog array1,777 to 2,005 m
  • CMR XPT ADTcombinable magnetic resonance · formation pressure tester (PressureXpress)1,846 to 2,030 m
  • MDTmodular formation dynamics tester1,912 to 1,943 m

Logs, casing, and the files you can open →

Seeing the core itself

The core is held by the Norwegian Offshore Directorate in its Geobank, which has rooms for viewing and sampling by booking.

The Directorate's Geobank: viewing and sampling →

About this data

Norwegian Offshore Directorate (Sodir) FactPages, mirrored nightly and used under the Norwegian Licence for Open Government Data (NLOD). The Directorate files a core as an interval and nothing against it. Everything else on this page is on file for the wellbore and is shown here because its depth falls inside the core's interval: photographs by the interval in their title, thin sections and slides by their depth, tests and logs by overlap, units by this wellbore's own tops. Core depths are driller's depths, so a mark at the very edge can belong to the neighboring core. Reports are filed for the well, not for one core.

Developers: this page as JSON is GET /v1/data/norway/wells/7638/cores/2, documented in the API reference.