NORWAY · WELLBORES · NPDID 7721
6406/12-4 S
Exploration · Wildcat · P&A · Oil shows · VNG Norge AS · PL 586
Core 2
Core 2 of 6406/12-4 S was cut from 3,942.5 to 3,950.5 m, 8 m in the Spekk Fm and Melke Fm. The Directorate lists core samples from it as available.
- 8
- m cored · 3,942.5 to 3,950.5
- 1
- formation boundary crossed
- 9
- log runs across it
SODIR FACTPAGES · PLACED BY DEPTH IN THIS WELLBORE
Down the core
TOP OF THE CORE AT THE TOP · TAP A MARK FOR WHAT IT IS
The Directorate has no photographs, thin sections, core-derived slides, or tests on file inside this core's interval. The well's core reports, where there are any, are below.
What it was cut through
Logs run across it
9 RUNS COVERING PART OF THE INTERVAL
- HDIL XMAC ORIT ZDL CN DSLhigh-definition induction log · cross-multipole array acoustic · orientation tool · compensated Z-densilog · compensated neutron · digital spectral gamma ray360 to 4,072 m
- VSPvertical seismic profile1,745 to 4,310 m
- MWD - ATK ZTKR ZTKG COP OTK SDTKmeasurement while drilling · OnTrak gamma ray and resistivity2,248 to 4,318 m
- HDIL ZMAC ORIT ZDL CN DSLhigh-definition induction log · orientation tool · compensated Z-densilog · compensated neutron · digital spectral gamma ray3,650 to 4,322 m
- MREX FLEX DSLmagnetic resonance explorer · digital spectral gamma ray3,650 to 4,060 m
- UXPL ORIT GXPL GRorientation tool · gamma ray3,650 to 4,060 m
- PCOR3,726 to 4,021 m
- RCX3,730 to 4,025 m
- PCOR3,912 to 4,267 m
Seeing the core itself
The core is held by the Norwegian Offshore Directorate in its Geobank, which has rooms for viewing and sampling by booking.
About this data
Norwegian Offshore Directorate (Sodir) FactPages, mirrored nightly and used under the Norwegian Licence for Open Government Data (NLOD). The Directorate files a core as an interval and nothing against it. Everything else on this page is on file for the wellbore and is shown here because its depth falls inside the core's interval: photographs by the interval in their title, thin sections and slides by their depth, tests and logs by overlap, units by this wellbore's own tops. Core depths are driller's depths, so a mark at the very edge can belong to the neighboring core. Reports are filed for the well, not for one core.
Developers: this page as JSON is GET /v1/data/norway/wells/7721/cores/2, documented in the API reference.